Installation Guide

11
UsingtheRemoteControl
1.Non-rechargeablebatteriesarenottoberecharged.
2.Batteriesaretobeinsertedwiththecorrectpolarity.
3.Exhaustedbatteriesaretoberemovedfromtheproduct.
4.Alwayspurchasethecorrectsizeandgradeofbatterymostsuitable
fortheintendeduse.
5.Replaceallbatteriesofasetatthesametime..
6.Cleanthebatterycontactsandalsothoseofthedevicepriortobatteryinstallation.
7.Removebatteriesfromequipmentwhennotusedforanextendedperiodoftime.
WARNING
!
Donotingestbatteries.
NOTE:
Batterydisposal
Pleasealwaysdispose
ofbatteries atasuitable
recyclingpoint.
Flame Control
Heater Control
●󵿎Using the Remote control
The operation of the remote control buttons work the same as button on the control panel.
●󵾯Install the battery
For replacement batteries, use AAA batteries.
Press down and slide back cover off the battery compartment.
Insert two provided AAA batteries into the battery compartment making sure that the ends of the batteries
with the negative(-) symbols are against the springs in the battery compartment.
Replace the battery compartment cover, making sure it snaps into position.
NOTE:
The remote control cannot be used to switch between degree Fahrenheit and degree Celsius.
Main Power
Time Control
Heater Down
Heater Up