Technical Specifications

CIVIK
THE PAINTED STEEL STAIRCASE
The CIVIK interior spiral staircase model is available
in 3 diameters - 3 ft. 11 1/4“, 4 ft. 7 1/8“, and 5 ft. 3“.
It is available in 3 colors - black, white, and grey-
powder coat finish painted-ready to install – clock-
wise as well as counter-clockwise.
The treads are made of solid steel, with black dura-
ble non-slip PVC tread covers.
The handrails are made with a flexible metal core
with a black covered grip.
The standard CIVIK staircase kit is adjustable in
height from a range of 8 ft. 3 1/4“ to 10 ft. 1/8“ and
with additional components, can be extended to a
maximum height of 12 ft. 4“ or to a minimum of 6 ft.
10 5/8“. The standard kit with 12 treads and the land-
ing installs with a 360° turn. By adding or subtracting
treads the rotation will change by approx. 30° per
tread.
Additional riser kits can be purchased separately.
Can be used in square, round or mezzanine applica-
tions. To allow for proper installation and full clear-
ance, the finished opening MUST be at least 2
INCHES GREATER than the diameter of the stair-
case kit.
To complete your project a BALCONY RAIL kit is
available. The BALCONY RAIL kit comes complete
with 10 balusters, handrail, and all the necessary
hardware to complete a 3 ft. 11 1/4“ installation.
The BALCONY RAIL kit is available in the same
colors as the CIVIK staircase kit.
SAFETY BARS are available in a set of 12 to close
off the back of the treads (this way a 4” sphere will
not pass through).
Each CIVIK staircase kit is shipped complete with
detailed assembly instructions and a DVD to assist
in your installation. You can also view an installa-
IMPORTANT: CONSULT YOUR LOCAL BUILDING INSPECTOR FOR ANY QUESTIONS AND SPECIFICS
REGARDING COMPLIANCE WITH THE LOCAL BUILDING CODES PRIOR TO PURCHASE.