Technical Specifications

PHOENIX

CLEAR SEALED BEECH WOOD AND STEEL

The PHOENIX model is available in 3 diameters

3 ft. 11 1/4“, 4 ft. 7 1/8“, and 5 ft. 3“.

It is available in 3 colors - black, white, and grey

- powder coat finish painted - ready to install -

clockwise as well as counter-clockwise.

The standard PHOENIX staircase kit is adjust-

able in height from a range of 8 ft. 3“ to 10 ft.

1/8“ and with additional components, can be

extended to a maximum height of 12 ft. 4“ OR to

a minimum of 6 ft.10 5/8“.

Additional riser kits can be purchased sepa-

rately.

The PHOENIX stair treads are manufactured

from European beech wood, finished with a light

natural stain and clear coat protective sealer.

To allow for proper installation and full clear-

ance, the finished (round, square or mezzanine)

opening for the installation of the spiral staircase

of your diameter choice MUST be at least 2

INCHES GREATER than the diameter of the

staircase kit.

To complete your project a BALCONY RAIL kit

is available. The BALCONY RAIL kit comes

complete with 10 balusters, handrail, and all the

necessary hardware to complete a 3 ft. 11 1/4“

installation.

The BALCONY RAIL kit is available in the same

colors as the PHOENIX staircase kit.

SAFETY BARS are available in a set of 12 to

close off the back of the treads.

Each PHOENIX staircase kit is shipped com-

plete with detailed assembly instructions and a

DVD to assist in your installation. You can also

view an installation video on our website at

www.arkestairs.com.

Important: Consult your local building inspector for any questions and specifics regarding

compliance with the local building codes prior to purchase.

PAGE 1
PHOENIX CLEAR SEALED BEECH WOOD AND STEEL The PHOENIX model is available in 3 diameters 3 ft. 11 1/4“, 4 ft. 7 1/8“, and 5 ft. 3“. It is available in 3 colors - black, white, and grey - powder coat finish painted - ready to install clockwise as well as counter-clockwise. The standard PHOENIX staircase kit is adjustable in height from a range of 8 ft. 3“ to 10 ft. 1/8“ and with additional components, can be extended to a maximum height of 12 ft. 4“ OR to a minimum of 6 ft.10 5/8“.
PAGE 2
PHOENIX SPECS Material: Steel Tread Material: Clear sealed solid beech wood 1 5/8“ thick Tread Length: 3 Ft. 11 1/4 “ 20 1/4“ 4 Ft. 7 1/8“ 24 1/2“ 5 Ft. 3“ 28 1/2“ Tread Depth: 10 1/2“ Handrail Material: 1 3/4“ Ø flexible aluminum core with simulated wood grain PVC Available Colors / Finish Premium Semi-Gloss: BLACK (RAL 9017) - WHITE (RAL 9010) - GREY (RAL 9006) Center Pole: 2 3/8“ Ø, 4 Ft. 1” long (2 pieces are included in the stair kit) Landing width for 60° triangular landing: 3 Ft.