Installation Guide

7 - kr
After you have nished assembling the staircase,
please visit our website and send us your suggestions: www.arke.ws
17. The rst balusters (C12) of the long side of every tread (L40) have to be cut.
18. Tighten the part C28 completely, by using the part B02 (g. 1). For a correct assembly twist the
key at about 90° from the contact point.
Final Assembly
19. Control the vertical line of the whole stair and, if necessary, correct it by moving the support N16
(g. 1).
20. Disassemble the rst tread (L40) and drill the oor with a Ø 14 mm tip in relation to the present
holes on the support N16 (g. 1).
21. Insert the parts C39 and tighten completely (g. 1).
22. Reassemble the rst tread (L40) and x on the oor, in relation to the rst baluster (C12), the part
F01, by drilling with a Ø 8 mm tip. Use the parts B11, B12, B83 and B02 (g. 1).
23. Insert the baluster (C12) and tighten the part B02 (g. 1).