PTM125-S BBP125-S
|
15” Flexible Steel Gooseneck Mount
!
Safety Precautions
Drilling onto the  oor or console can permanently damage the
vehicle. Use caution and consult a mobile install professional to
avoid drilling into the gas tank, electrical system or other highly
sensitive vehicle components.
Arkon Resources, Inc. is not responsible for any damages caused to
your vehicle, your device, or yourself due to the installation or use
of this product.
The Mobile Mounting Specialists
www.arkon.com
Arcadia, CA 91006 USA
Made in Taiwan
© Copyright 2007 Arkon Resources, Inc.
Consumer Hotline:
(USA) (800) 841-0884
(INT’L) (626) 254-9005
Mon-Fri. 9am-5pm, PST
Position the Floor / Console
Bracket and drill into the  oor or
console.
Attach the Floor / Console Bracket
with screws and cover with plastic
caps.
Screw the steel shaft into the Floor
/ Console Bracket.
Step 1.
Step 2.
Step 3.
Installation Instructions
Floor Mount
Console Mount
Floor or Console Mounting
For a more permanent mount, connect the
Floor / Console Mount Bracket to the  oor or
console. This will require drilling into your
vehicle’s interior surface.
Package Contents:
(1) Seat Bolt Bracket
(1) Floor / Console Bracket
(1) Flexible Steel Shaft with Plastic Tubing
(1) Dual T Pattern Head
(3) Screws
(4) Plastic Caps
(1) Custom Cradle (CC002-Palm or CC003-BBP)
Adjust the steel shaft by bending with
both hands to the desired location of the
male dual T-head.
Use the adjustment knob (A) and wing
nut (B) on the pedestal head to swivel or
rotate the head position if necessary.
Align the female dual T-slots on the
cradle to the dual T-tabs on the pedestal
head. Insert device.
Step 1.
Step 2.
Step 3.
Pedestal Head Adjustments
With a socket wrench, loosen the
passenger seat bolt, insert the Seat Bolt
Bracket, and retighten the seat bolt.
Step 2.
Passenger Seat Bolt Mounting
For a simple mount that can be easily moved
to another vehicle, install using the passenger
seat bolt (no drilling required).
Step 1. Screw the  exible steel shaft into the
Seat Bolt Bracket.
CM088-TS-2 15” Flexible Steel “Gooseneck” Mount
(shown with Seat Bolt Bracket attached)
Compatability: (not complete)
- Palm Treo 650 - HP iPAQ 6815 - XDA Adom Exec
- Palm Treo 680 - HP iPAQ 6818 - Dopod 818 Pro
- Palm Treo 700W - HP iPAQ 6828 - Dopod 810
- Palm Treo 700P - HTC P3600 - Pharos GPS 525P
- Palm Treo 750 - HTC 6815 - i-Mate JAMin
Connecting the cradle
Slide the T-slots of the cradle onto
the T-tabs of the mount head.
CC002-Palm CC003-BBP
Compatability:
Blackberry Pearl 8100
NOTES:
1. Tool for Seat Bolt mounting - socket wrench
2. Tools for optional Floor or Console mounting
- drill and screwdriver
3. Do not twist the cradle or device while
mounted on top of the pedestal to adjust the
steel shaft as this can break the dual T grooves.
!
Safety Precautions
Drilling onto the  oor or console can
permanently damage the vehicle. Use
caution and consult a mobile install
professional to avoid drilling into the gas
tank, electrical system or other highly
sensitive vehicle components.
Arkon Resources, Inc. is not responsible for
any damages caused to your car or yourself
due to the install of the pedestal mount.
Threaded Flexible
Steel Shaft
Seat Bolt Bracket
(A)
(B)

Summary of content (1 pages)