How to Guide

Consumer Hotline:

USA (800) 841-0884

INT’L (626) 254-9005

Monday - Friday 9 am - 5 pm, PST

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in Taiwan & China

The Mobile Mounting Specialists™

Attach the holder to the mount by inserting the Dual T-Tabs of

the mount into the holder.

Attach adhesive mount to a clean, ﬂ at area of the dash or console.

Insert device by pushing down on the lower support legs and

engaging the spring-loaded mechanism. Adjust support legs as

necessary. OPTIONAL: Screws may be used for more permanent mounting.

Safety Precaution

Arkon is not responsible for any damages caused to your vehicle, your device, or

yourself due to the installation or use of this mount. Do not install Arkon products

over an air bag cover or within the air bag deployment zone. Arkon Resources, Inc.

assumes no responsibility or liability for injury or death as a result of crash crashes

and / or air bag deployment.

NOTE: If necessary, use

included long legs for

large devices or cases.

Push down on lower

support legs to

mount device.

USB Slot

Charging

Cord

NOTE: Let mount adhesive cure for 24 hours before use.

CM048-2

SM060-2

Package Contents:

CM048-2 – 1” Multi-Angle Adhesive or Screw Dashboard Mount

SM060-2 – Slim-Grip® Ultra™ Holder

rev.021215

Select the appropriate short or long support legs and install to holder.

For large sized smartphones such as the Galaxy Note and midsize

tablets, select 4 long support legs.

SM628 – IPM628 | Slim-Grip® Ultra™ Multi-Angle Dashboard or Console Mount

IMPORTANT: Drilling into the dash, ﬂoor, or console will permanently

damage the vehicle. Use caution and consult a mobile install professional

to avoid drilling into the gas tank, electrical system or other highly sensitive

vehicle components.

Mounting Screws