Product Manual

How-To Use Assure® ID Insulin Safety Syringes

Step 1

To open, separate paper backing from plastic by grasping tabs and peeling apart with both hands.

Step 2

Hold onto safety shield while removing protective needle cap. Fill syringe with insulin while

holding index finger against finger flange.

Step 3

Extend safety shield forward until you feel the positive stop and hear the audible snap. This will

secure the safety shield for safe transportation to patient site. Do not twist safety shield or

syringe. Once shield is locked by twisting, syringe should be discarded.

Step 4

To give injection, keep fingers clear of open end of safety shield, retract safety shield until it

snaps into original position. For safety reasons, it will take a little extra force to retract safety

shield to original position. To avoid unexpected extension of the safety shield, always keep one

finger over the finger flange during use.

Step 5

Immediately following injection, extend safety shield forward until snap is heard. Then, lock

safety shield by twisting in either direction until you feel the positive stop and hear an audible

click.

PAGE 1
How-To Use Assure® ID Insulin Safety Syringes Step 1 To open, separate paper backing from plastic by grasping tabs and peeling apart with both hands. Step 2 Hold onto safety shield while removing protective needle cap. Fill syringe with insulin while holding index finger against finger flange. Step 3 Extend safety shield forward until you feel the positive stop and hear the audible snap. This will secure the safety shield for safe transportation to patient site. Do not twist safety shield or syringe.