TRULY WIRELESS NOISE CANCELING EARBUDS ENGLISH Quick Start Guide | User Manual FCC ID: 2A3WX-ONE
CONTENTS INTRODUCTION 2 QUICK START GUIDE 3 USER MANUAL Power On/Off Charging Bluetooth Pairing Touch Control LED behavior Reset to Factory Settings Specifications 4 4 5 6 7 8 9 SAFETY INFORMATION 10 NOTICE 12
ARKTIS ONE INTRODUCTION Box Contents Quick start guide / User manual (This booklet) Ear-tips x 3 S/M/L *M size ear-tips are attached to ARKTIS ONE in-box 封面 ARKTIS ONE Truely wireless earbuds with charging case Warrenty Card Charging cable USB-C to USB-A Overview Touch pad LED indicator (Earbuds) LED indicator Pairing/reset button USB-C connector (Charging case) 2
ARKTIS ONE QUICK START GUIDE 1. Open the charging case (Note). The earbuds will automatically power on. Note: Please remember to remove the stickers on the earbuds first and then return the earbuds to the charging case. Settings Bluetooth Bluetooth 2. Go to Settings Bluetooth. Arktis One ON Bluetooth Arktis One 3. Wait for “Arktis One” to appear in OTHER DEVICES list on iOS or AVAILABLE DEVICES list on Android OS. PAIR 4. Select “Arktis One” and tap it to pair. 5.
ARKTIS ONE USER MANUAL Power On/Off 1. The Arktis One earbuds will turn on automatically when the charging case is open. 2. The Arktis One earbuds will turn off automatically when the charging case is closed after the earbuds are placed back into the case. Charging 1. Connect Arktis One charging case to a power source with the provided USB-C cable, or or 2.
ARKTIS ONE USER MANUAL Bluetooth Pairing Tap x 5 1. Remove both earbuds from the charging case. 2. Tap the touch pad on either earbud 5 times. The earbuds will then enter pairing mode with LED light flashing. or 1. Place both earbuds back to the charging case and keep the charging case open. Press and hold for 2 seconds 2. Press the button located in the back of the charging case for 2 seconds. The earbuds will then enter pairing mode with LED light flashing.
ARKTIS ONE USER MANUAL Touch Control ANC On/Off R (Active Noise Cancellation) Play/Pause L Next Track L Previous Track L R Tap x 3 R L Answer/End Call L Tap x 2, hold on 2nd tap Tap x 2, hold on 2nd tap R Reject Call Voice Assistant Tap x 1 Tap x 2 Volume Up Volume Down Tap x 2 R L R 6 Tap x 1 Tap and hold for 1 second Tap and hold for 2 seconds
ARKTIS ONE USER MANUAL LED Behavior L / R Power on but not connected with any device Power on and connected with a device Pairing mode Battery low (<20%) when not connected with any device Charging LED OFF Battery fully charged LED OFF While being charged Battery Level 100% Battery Level 1% - 99% Flash x 1 Flash x 2 Flash x 3 7 Not being charged When open or close the case, Battery Level 70% - 100% Battery Level 30% - 70% Battery Level 1% - 30%
ARKTIS ONE USER MANUAL Clear Pairing Device Record 1. Put the earbuds into pairing mode by tapping either earbud 5 times. Tap x 5 2. Press and hold the touch pad until the LED light on the earbud flash blue 3 times. LED flash 3. Place the earbuds back in the charging case and leave them for 10 seconds. The pairing device record is now cleared. Reset to Factory Settings 1. Place the earbuds back in the charging case and keep the case open. Press and hold for 8 seconds 2.
ARKTIS ONE USER MANUAL Specifications Model Name ARKTIS ONE Processor Qualcomm® QCC5141 Bluetooth® audio processor Bluetooth version 5.2 Bluetooth range 10 meters Bluetooth frequency 2.402 - 2.480GHz Bluetooth transmission power < 8.0dBm Bluetooth profiles supported A2DP v1.3.1, AVRCP v1.6, HFP v1.7, HSP v1.
ARKTIS ONE SAFETY INFORMATION Please read the following safety and operational instructions before using your earbuds and accessories. Keep these instructions for your reference and follow the instructions to ensure correct and safe operations. General The operating, storage, and charging temperature is from 5°C to 35°C (40°F to 95°F). Please avoid putting the earbuds and the charging case under direct sunlight for an extended period.
ARKTIS ONE SAFETY INFORMATION Charging Warnings Ensure that the voltage rating corresponds to the power supply you intend to use. o Charge by using the qualified AC adapter and power source. o Charge the earbuds according to the instructions supplied with the product. Battery Warnings To avoid the risk of explosion, fire, or leakage of toxic chemicals, please observe the following warnings: o Do not dispose of the product in a fire or heat above 100°C.
ARKTIS ONE NOTICE Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96 EC: Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products.
ARKTIS ONE NOTICE Radiation Exposure Statement: This equipment complies with FCC radiation exposure requirement. The device can be used in portable exposure condition without RF restriction. NCC 符合性聲明 取得審驗證明之低功率射頻器材, 非經核准, 公司, 商號或使用者均不得擅自變更頻率, 加大功率或變更原設計之特性及功能. 低功率射頻器材之使用不得影響飛航安全及干擾合法通; 經發現有干擾現象時, 應立即 停用, 並改善至無干擾時方得繼續使用. 前述合法通信, 指依電信管理法規定作業之無線電通信. 低功率射頻器材須忍受合法通信或工業, 科學及醫療用電波輻射性電機設備之干擾. Obtain more information and get support at www.arktisaudio.com ©2021 ARKTIS Inc. All rights reserved.