Information Sheet

O-5
www.aifittings.com | Tel: [phone] | Fax: [phone] | Email: Sales@aifittings.com
LOW VOLTAGE CABLE MANAGEMENT
LVU1W
A
B C
Recessed Low Voltage Mounting Brackets
Single through 4-gang brackets for retrofit or new construction. Available in paintable white (trim
plate). Designed to install low voltage Class 2 only.
FEATURES AND BENEFITS
• Non-metallic
• Suitable for old or new work
• Quick and easy installation and it’s recessed so connectors don’t extend past the wall surface
• Adjusts to fit 1/4” to 1-1/2” wall thicknesses
• Mounting wings hold bracket securely against wall when screws are tightened
• Recessed bracket includes loops for tie-off; two attachable knockouts; one device plate; one trim
plate; and four screws
INSTALLATION INSTRUCTIONS FOR NEW WORK
Option: Insert knockouts
in openings (back)
if installing conduit.
Knockouts fit 3/4” (as
shipped) and 1” (break
out center).
Note positioning tabs
and loops for tying off
cable.
Mount bracket to stud. Option: Attach 3/4” or 1”
conduit as desired (3/4”
shown).
1 2 3
Loop
Tabs
INSTALLATION INSTRUCTIONS FOR EXISTING WALL
Determine bracket
location. Using bracket
without trim plate as a
template. Level. Mark.
Cut hole.
Attach trim plate to
bracket with supplied
screws. Insert bracket
assembly into opening.
Tighten
mounting wing
screws to hold
bracket securely against
wall board.
Finished installation.
LVU1W shown.
Connectors stay inside
this recessed low voltage
mounting bracket.
1 2 3 4
E253895
LR49636
CATALOG
NUMBER
UPC/DCI/NAED
MFG #018997
DESCRIPTION
UNIT
PKG
STD
PKG
DIM
A
DIM
B
DIM
C
LVU1W 00285 Single Gang/White 1 4 6.698 4.200 2.000
LVU2W 20011 2-Gang/White 1 4 6.698 6.012 2.048
LVU3W 20012 3-Gang/White 1 1 6.818 7.930 2.048
LVU4W 20013 4-Gang/White 1 1 6.818 9.742 2.048
Add suffix “BL” to Catalog # instead of “W” when ordering in black, for example LVU1BL.
PATENTED.