MSDS

ManualsBrandsArlington ManualsFittings1-1/2" 1 HOLE MI STRAP

SAFETY DATA SHEET

SDS Name:

Zinc Die Casting Alloys

Pg:1 of 5

SDS Name:

Zinc Casting Alloys

1. Identification of the substance or mixture and the Supplier

Identification of the substance or preparation

Product Name

EAZALL

Common/Trade Name

EAZALL #3, #5, #7, Alloy 2; AC 43A ; ZnAl4Cu3 ; Zamak 2 . Alloy 3; AG 40A ; ZnAl4 ; Zamak 3 .

Alloy 5 ; AC 41A ; ZnAl4Cu1 ; Zamak 5 ; ZA-8 ; Zamak KS ; ZDC1; ZDC2; HF; ACuZinc; Kirksite

Use of the

substance/preparation

Metal Alloy for Die Casting

Supplier

Eastern Alloys, Inc.

Henry Henning Drive

Maybrook, NY 12543

(845) 427-2151

www.eazall.com

Emergency Telephone #

845-427-2151

Emergency contact

J. Malmgreen

2. Hazard Identification

 Classification: None.

 GHS Label Elements: None.

 Other Hazards:

- Burn hazard upon heating

- Respiratory hazard from dust upon cutting or grinding

- Presence of moisture during melting carries risk of explosion

- Fume inhalation hazard upon melting

3. Composition/Information on Ingredients

Ingredient Name

CAS #

EC #

Classification

Zinc (Zn)

7440-66-6

90.5-96.1

231-175-3

None

Aluminum (Al)

7429-90-5

2.5-8.8

231-072-3

None

Copper (Cu)

7440-50-8

0 - 6.0

231-159-6

None

4. First Aid Measures

 After inhalation: After inhalation of fume: Remove the victim into fresh air: Respiratory problems: consult a

doctor/medical service

 Skin contact: In case of burns: Wash immediately with lots of water (15 minutes)/shower; Remove clothing while

washing; Do not tear off solidified product from the skin; Do not remove clothing if it sticks to the skin; Cover

wounds with sterile bandage

- Consult a doctor/medical service

- If burned surface > 10% of body, take victim to hospital

 Eye contact: Rinse immediately with plenty of water for 15 minutes

- Take victim to an ophthalmologist

 After ingestion: Not applicable

5. Fire-Fighting Measures

Summary of content (5 pages)

PAGE 1
SAFETY DATA SHEET SDS Name: Zinc Casting Alloys 1. Identification of the substance or mixture and the Supplier Identification of the substance or preparation EAZALL Product Name Common/Trade Name EAZALL #3, #5, #7, Alloy 2; AC 43A ; ZnAl4Cu3 ; Zamak 2 . Alloy 3; AG 40A ; ZnAl4 ; Zamak 3 .
PAGE 2
SAFETY DATA SHEET      Suitable extinguishing media: Use an extinguishing agent suitable for the surrounding fire. Typically, apply dry chemical, dry sand, or special powder extinguishing (Class D) media. Do NOT use water, carbon dioxide or foam on molten metals. Water may be ineffective for extinguishing a fire but should be used to keep fire exposed billets, ingots and castings cool.
PAGE 3
SAFETY DATA SHEET - Eye protection: safety eyewear; on (re)melting: face shield & goggles/safety glasses Skin protection: protective clothing; on (re)melting: heat resistant clothing, safety footwear 9. Physical and Chemical Properties General Information Solid Physical Form None Odor Silver Gray Color Important Health, Safety, and Environmental information 900 – 910 ⁰C (1652 – 1670 ⁰F) Boiling Point 375 – 487 ⁰C (714 – 903 ⁰F) Melting Point 6.0 – 6.
PAGE 4
SAFETY DATA SHEET Aluminum      Oncorhynchus mykiss (LC50) Oncorhynchus mykiss (LC50) Oncorhynchus mykiss (LC50) Daphnia magna (LC50) Oncorhynchus mykiss (LC50) Oncorhynchus mykiss (LC50) Oncorhynchus mykiss (LC50) 96 96 96 96 96 96 96 0.24 mg/l 0.41 mg/l 0.56 mg/l 0.57 mg/l 0.12 mg/l 0.16 mg/l 0.
PAGE 5
SAFETY DATA SHEET    * reporting not required when diameter of the pieces of solid metal released is equal to or exceeds 100 micrometers (0.004 inches). EPCRA Section 302 Extremely Hazardous Substance: ........................... No Ingredients Qualify EPCRA Section 311/312 Hazard Categories: ........................................... No Hazard Categories Apply EPCRA Section 313 Toxic Release Inventory: .........................................