Brochure
Arlington’s non-conductive box extenders
extend set back metal or non-metallic
electrical boxes up to 1-1/2 inches,
the easy way!
They work with any single gang device
and most steel and non-metallic outlet
boxes, providing a level, fully supported
wiring device that’s flush with the wall
surface. In steel boxes they prevent
arcing and shorting by creating a barrier
between the box and device screws.
Now available in three- or four-gang,
our newest box extenders have a slightly
larger flange that provides extra device
support when the wall opening is miscut
or oversized. They accommodate midi or
jumbo cover plates – and they’re
trimmable along the perforated flange
for use with standard plates. Best of all
they cost the same as our ‘regular’
flange box extenders. If you normally
use a midi plate these are the box
extenders for you!
• Complies with NEC 2017,
article 314.20 for set back boxes
• 2-hour fire rating
Large Flange Listed Box Extenders
NEW!
Larger
flange
THE Answer to Set Back Electrical Boxes – Now in 3 and 4-Gang!
Solves problem
of set back boxes,
miscut holes
Made in USA
BE1
BE1X
Larger
flange
Trims to fit
standard
wall plates
Patented/Additional patents pending
Larger perforated flange
for better device support...
N
EW
!
TH
R
E
E
-G
an
g
•FOU
R
-G
a
ng
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717 • Fax 570/562.0646
www.aifittings.com
BE3X
BE3X
Catalog UPC/DEI/NAED Description Std
Number Mfg. #018997 LARGE FLANGE BOX EXTENDERS Pkg
BE1X 40171 Single-gang with larger flange 25
BE2X 48973 Two-gang with larger flange 25
BE3X 48974 Three-gang with larger flange 10
BE4X 48975 Four-gang with larger flange 10
Works in handy boxes and 4" square electrical boxes with plaster rings for a
single switch or receptacle. Functions with all standard devices, switches and GFCIs.
NEW!
NEW!
SAME COST as our
‘Regular Flange’ box extenders!
BE3X
BE4X
BE1X
BE2X