Cut Sheet

Arlington’s non-conductive box extenders
extend set back metal or non-metallic
electrical boxes up to 1-1/2 inches,
the easy way!
They work with any single gang device
and most steel and non-metallic outlet
boxes, providing a level, fully supported
wiring device that’s flush with the wall
surface. In steel boxes they prevent
arcing and shorting by creating a barrier
between the box and device screws.
Our newest box extenders, the single
gang BE1X and two-gang BE2X have a
slightly larger flange that provides extra
device support when the wall opening is
miscut or oversized. Both accommodate
midi or max cover plates. Both are
trimmable for use with standard plates,
and cost the same as our ‘regular’
flange box extenders. If you normally
use a midi plate these are the box
extenders for you!
• Complies with NEC 2017,
article 314.20 for set back boxes
• 2-hour fire rating
UL/CSA Listed Box Extenders
NEW!
Larger
flanges
1 Stauffer Industrial Park
Scranton, PA 18517
800/233.4717
Fax [phone]
www.aifittings.com
Arlington
THE Answer for Set Back Electrical Boxes
Problem:|
Set back box in miscut hole
Made in USA
Same cost as
our ‘Regular’
box extenders
BE1
BE1X
BE1X,
BE2X
Trimmable
to fit standard
wall plates
B
E2X
Two gang
Patented/
Additional patents pending
BE1X
Single gang
Larger flange
gives better
support
for device
BE2X
Two gang
N
EW
!
La
rg
er
P
e
rf
o
ra
t
e
d
Fl
a
n
g
e
s