Install Instructions

S-4
Email: Sales@aifittings.com | Fax: [phone] | Tel: [phone] | www.aifittings.com
MISCELLANEOUS
TWO HOUR
FIRE RATING
BE1
CATALOG
NUMBER
UPC/DCI/NAED
MFG #018997
DESCRIPTION
UNIT
PKG
STD
PKG
DIM
A
DIM
B
DIM
C
BE1 40160 Single-gang 25 25 2.313 4.188 1.813
BE1X 40171
Single-gang w/ larger flange
Better device support in oversized or
miscut wall openings.
25 25 2.325 4.628 1.813
BE1BAG 51905 Single-gang 1 100 2.313 4.188 1.813
BE2 48960 Two-gang 25 25 4.100 4.188 1.813
BE2X 48973 Two-gang w/ larger flange 25 25 4.125 4.625 1.813
BE3 48967 Three-gang 10 10 5.937 4.188 1.813
BE3X 48974 Three-gang 10 10 5.937 4.625 1.813
BE4 48968 Four-gang 10 10 7.749 4.188 1.813
BE4X 48975 Four-gang 10 10 7.749 4.625 1.813
BE3BE4
Box Extenders
Levels and supports the wiring device where the box is set back from the wall surface. Extends the
box up to 1-1/2”.
FEATURES AND BENEFITS
• Allows the contractor to comply with 2017 NEC Article 314.20
• Levels and supports the wiring device where the box is set back from the wall surface (adjusts up to a
1-1/2” box extension)
• Works in handy boxes and 4” square electrical boxes with plaster rings for single switches or receptacle
• Functions with all standard devices, switches, and GFCIs
• Manufactured from 105°C continuous use 94V0 rated flame retardant plastic for safer installations
BE1BAG includes two #6 x 2” long screws.
PATENTED.
BE2
Scan For Video
BE1X
BE2
X
Note: To install without removing device wires, tilt the device through the BE1 at a slight angle,
straighten it and tighten the screws!
SOLUTION...
Pull wires through.
Press the BE1 firmly into
the electrical box.
1
Attach wires to receptacle.
Tighten screws for a level,
fully supported, code
compliant installation.
2
PROBLEM...
Electrical box set back
from wall surface.
INSTALLATION INSTRUCTIONS
HEAVY-DUTY
PLASTIC
cULus Listed!
BE1X
A
B
C
BE1
A
B
C
A
B
C
BE2XBE2
B
C
A
BE3XBE4X