&DVW 6WRQH )LUH 3LW 1
E D C B A PARTS LIST: PA RT # A B C D E DESCRIPTION Cast stone base Fire bowl Charcoal grid Mesh screen cover Lifting tool QTY. 1 1 1 1 1 HARDWARE LIST: PA RT # DESCRIPTION QTY.
ASSEMBLY Step 1: Choose a level locati on for assembly. Remove all parts from th e packagi ng, and check for missing parts. Step 2: Attach the M6 ring screw (F) to the mesh screen cover (D) using one M6 Nut (G) as shown in Fig. 1. F G D Fig.1 Step 3: Place all parts on the cast stone base as shown in Fig . 2. E D C B A Fig.
WARNINGS AND CAUTIONS WARNING:TO AVOID INJURY 1. FOR OUTDOOR USE ONLY. 2. Do not use the fire pit indoors. Because of hazardous carbon monoxide fumes, a lack of ventilation can cause death. 3. Do not use gasoline or kerosene to start fires in the fire pit. Keep all flammable liquids away from the fire pit. 4. This unit is designed to burn charcoal and untreated wood only. Fill the bottom of the bowl with sand until the surface of sand is 15 mm below the grill. 5.
CARE AND MAINTENANCE Inspecting Inspect this fire pit on a regular basis to ensure product safety and longer product life. DO NOT attempt to inspect this outdoor fire pit until the fire is COMPLETELY out and cooled down. 1. Check handles to make sure they are secure. 2. Check components for any signs of damage or rust. 3. If damage to any component is detected, do not operate until repairs are made.
ONE-YEAR-LIMITED WARRANTY 6
