Manualshelf

Assembly and Installation Instructions

ManualsBrandsArlmont & Co. ManualsBronze Outdoor Hanging LightsMerced Oil Burnished Bronze 1 -Bulb 17.5'' H Outdoor Hanging Lantern
12
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
1. Attach nipple to the mounting strap, then secure it
with a washer and hex nut.
2. Attach the mounting strap to the outlet box by using
two mounting screws.
3. Secure the top loop to nipple.
4. Secure the loop onto threaded pipe.
5. Choose the length of the chain you need, then weave
the fixture wire and the fixture grounding wire through
the chain, collar and canopy.
6. Connect one end of the chain with the loop by using
a loop lock.
7. Connect the other end of the chain with the top loop
by using another loop lock.
8. Thread the fixture wire and fixture grounding wire
through the top loop, nipple and mounting strap.
Outlet Box
Housing Grounding Wire
Wire Nut(D)
Fixture Wire
Fixture Grounding Wire
Mounting Strap(A)
Green Grounding Screw(C)
Mounting Screw(B)
Nipple(E)
Top Loop (I)
Hex Nut(F)
Washer(G)
Threaded Pipe
Loop
Fixture
Bulb Type A Max.100W
(not included)
Loop Lock(K)
Loop Lock(K)
Canopy(H)
Collar(J)
Chain(L)
Mounting Strap (A)
Mounting Screw (B)
Green Grounding
Screw (C)
Hex Nut (F)
Wire Nut (D)
Canopy (H)
Top Loop (I)
Collar (J)
Nipple(E)
Washer (G)
Loop Lock (K)
Chain (L)
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Hardware Package(inculded):
Turn off the power at fuse or circuit
box.
Installation Steps

Summary of content (2 pages)