Owner Manual (15 Foot)

ASSEMBLY
1. Place 2x Leg (A) on the ground, ensuring the elbow pipes are at a 120-degree angle.
2. Align the hole on Center Pole (B) with the spring button on Leg (A). Press the spring button down
and carefully slide the center pole over the button, the spring button will snap through the hole in
the center pole when it is connected. Repeat this step to connect the other leg.
3. Align the hole on Upright Pole (C) with the top spring button of the leg. Press the spring button
down and carefully slide the pole over the button, the spring button will snap through the hole in the
upright pole when it is connected. Repeat this step to connect the other upright pole.
15
-
F
OOT HAMMOCK STAND
Read all assembly and care instructions carefully before using this product. Save these instructions for future reference.
Select a smooth, level surface to place the hammock stand.

400
pound
capacity
  
A
Leg 2
B Center Pole 1
C Upright Pole with Hook 2
D
Chain with Attached S-Hook 2
Ensure all parts are
accounted for before
disposing of packaging.

Summary of content (2 pages)