Assembly Instructions

Table Of Contents

Part # Description

2" sq. x 74" Left Post

2 2" sq. x 74" Right Post

3 ⅞ x 1½ x 22" Top/Bottom Cross Rail

4 ⅞ x 1½ x 22" Center Cross Rail

5 ¼ x 1½ x 66" Vertical Slat

6 Hardware Bag

(includes:)

2" sq. Post Cap

1¼" Painted Screw

Trellis Ground Anchor Kit

(includes:)

16" Steel Ground Anchor (L-Shaped)

#8 - 1" Painted Self Tapping Screw

PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.

IMPORTANT: Check boxes for Contents Listed

Check inside of parts as some parts are packaged

inside of others

When assembling components, place on a clean, flat

non-abrasive surface to avoid scratches

…

Battery or Electric Drill

with #2 phillips bit

… Tape Measure

…

Hammer or Rubber Mallet

(recommended)

… PVC, Super, or Crazy Glue

Qty

elli

General Information

Tools Required

Assembly Instructions

In the event of missing, damaged or defective parts

please call our customer service dept.

PAGE 1
Tr ellis Assembly Instructions Part # 1 2 3 4 5 6 7 Description 2" sq. x 74" Left Post 2" sq. x 74" Right Post ⅞ x 1½ x 22" Top/Bottom Cross Rail ⅞ x 1½ x 22" Center Cross Rail ¼ x 1½ x 66" Vertical Slat (includes:) Hardware Bag Qty 1 1 2 9 2 1 2" sq. Post Cap 2 1¼" Painted Screw 6 Trellis Ground Anchor Kit (includes:) 1 16" Steel Ground Anchor (L-Shaped) 2 #8 - 1" Painted Self Tapping Screw 4 General Information PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY.
PAGE 2
Warranty Statement 20 Year Guarantee Please call manufacturer direct with questions concerning missing or defective parts Our products are warranted to be free from manufacturing defects resulting in delaminating, peeling, flaking, corroding, cracking, crazing, or extreme amounts of fading or bleaching causing the PVC to change to its natural color for a period of 20 years from the date of purchase.
PAGE 3
1 Lay out one right post (part 2). Starting at bottom, insert one top/bottom cross rail (part 3) and nine center cross rails (part 4). 2 Slide left post (part 1) over corresponding cross rails. 3 Insert vertical slats (part 5) through center cross rails and into bottom cross rail.
PAGE 4
5 Separate top of post just enough to insert remaining top/bottom rail (part 3). 6 Using 1¼" screws, screw together trellis. Be sure that all parts are fully inserted into posts before securing. 7 Using PVC, super or crazy glue; glue post caps onto posts.