Installation & Assembly

# Description Qty

A Fire Bowl 1

B Fire Bowl Base 1

C Spark Screen 1

D Log Grate 1

E Poker 1

F Hardware 1

Figure 1

Figure 4 Figure 5

Figure 2 Figure 3

Figure 6

3. Align screen clip bolt to the bolt hole on

interior of bowl rim . Secure screen clip bolt by

twisting into place.Hand tighten only. Repeat

for remaining two screen clip bolts (Figure 4).

Place log grate into the bowl (Figure 5).

Parts

1. Lay out all the parts , place mounting

port of fire bowl base upwards on the

ground (Figure 1).

2. Center bowl over bowl base. Align

underside bowl connector nut to base bolt

,and tighten it by hand (Figure 2\Figure3).

4. Place spark screen on assembled fire bowl

unit, now it's ready for use (Figure 6) .

Copper Firebowl Fire Pit

with Handles

PAGE 1
Parts Copper Firebowl Fire Pit with Handles 1. Lay out all the parts , place mounting port of fire bowl base upwards on the ground (Figure 1). Figure 1 # Description Qty A Fire Bowl 1 B Fire Bowl Base 1 C Spark Screen 1 D Log Grate 1 E Poker 1 F Hardware 1 3. Align screen clip bolt to the bolt hole on interior of bowl rim . Secure screen clip bolt by twisting into place.Hand tighten only. Repeat for remaining two screen clip bolts (Figure 4). Place log grate into the bowl (Figure 5).
PAGE 2
WARNING： • Outdoor use only. Never use in enclosed area. Use in unventilated areas will endanger your life. • Do not use this unit on or near combustible surfaces or structures such as wood decks, dry leaves or grass, vinyl or wood siding, etc. • Use on level, non-combustible surface only. • Keep away from all combustible materials including gasoline and other flammable liquids and vapors. • Never use flammable accelerants, such as: gasoline, alcohol, paint thinners, kerosene, etc. to start a fire.