Installation Guide

NATURAL WEAVE ROLLER SHADE

INSTALLATION INSTRUCTIONS

Step 1: Check Package Contents

Step 2: Measure Brackets Position

2 Mounting Brackets should be positioned 4 inches from the left and right edges of the blinds.

Use a steel tape measure and a level to ensure accuracy.

Step 3: Mount Brackets on the Wall or Ceiling

Drill 2 screws for each Mounting brackets to the wall or ceiling.

 Mounting Bracket

22”- 40”= 2

46.5”= 3

 Anchor

22”- 40”= 4

46.5”= 6

 Screw

22”- 40”= 4

46.5”= 6

 Handle x1

 Blind x1

Make sure the brackets are level.

Wall Mount

Ceiling Mount

4in

2in

1 1/4in

For inside mount Ceiling installed, requiring at least 2 inches space for bracket installation.

For outside mount Wall installed, requiring at least 1 1/4 inches space for bracket installation.

PAGE 1
NATURAL WEAVE ROLLER SHADE INSTALLATION INSTRUCTIONS Step 1: Check Package Contents  Mounting Bracket 22”- 40”= 2 46.5”= 3  Anchor 22”- 40”= 4 46.5”= 6  Handle x1  Screw 22”- 40”= 4 46.5”= 6  Blind x1 Step 2: Measure Brackets Position 2 Mounting Brackets should be positioned 4 inches from the left and right edges of the blinds. Use a steel tape measure and a level to ensure accuracy. 4in Make sure the brackets are level.
PAGE 2
NATURAL WEAVE ROLLER SHADE INSTALLATION INSTRUCTIONS Step 4: Attach the Blind Place the front lip of the top of the headrail into the bracket (as shown below). While holding it in place push back to hook the near headrail up into the bracket. PUSH RELEASE Step 5: Handle assembly Make sure the handle is completely centered. Step 6: HOW-TO-USE To open and close blind: Pull and tuck.