User Manual

47
Modes, Rules, and Smart Alerts
The Edit Rule page displays.
5. Tap or click Edit
next to the rule.
The Edit Rule page displays.
6. Under If the following, tap or click Edit
next to Audio is detected.
The Audio Detection page displays.
7. Move the slider to the desired level of audio detection.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.
Your settings are saved.
Add a Rule That Includes a Siren Trigger
To add a rule that includes a siren trigger, you must add a new mode or edit an
existing mode.
Note: Only cameras connected to an Arlo Pro base station can trigger the siren.
For more information about adding a new mode, see Add a Mode on page 55.
To edit an existing mode, follow these instructions.
¾ To add a rule that includes a siren trigger:
1. Tap the Arlo icon
on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Devices page displays.
2. Tap or click Mode.
A list of devices displays.
3. Tap or click the base station.
4. Tap
or click > next to the mode.
5. Under Rules, tap
or click Edit next to the camera.