User's Manual
Table Of Contents
- 1. Get Started
- 2. WiFi Setup and Connections
- 3. Camera Basics
- 4. Modes, Rules, and Alerts
- 5. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Customize the camera spotlight settings
- Adjust the flicker setting
- View device information
- Remove a device from your account
- 6. Troubleshooting
26Modes, Rules, and Alerts
Essential Spotlight Camera
User Manual
To control whether the spotlight turns on when motion is detected, you can change the low-
light settings for your camera.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Video Settings > Low Light Settings.
5. Tap Spotlight to toggle the setting o and on.
Manage alerts
Arlo can push notications to your smartphone, send you email alerts, or do both. To receive
Arlo notications on your phone, you must install the Arlo app on your phone.
Note: If you log out of the Arlo app on your smartphone or mobile device, you will stop
receiving push notications.
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera.
4. Tap Edit
next to the mode.
Note: The Disarmed mode does not send alerts.
5. Under Alert, tap Push Notication to turn alerts on and o for your mobile device.
6. Under Alert, tap Email Alerts to turn email notications on and o.
7. To specify an email address, tap Edit
next to Email Alerts and enter the email address.
Schedule your camera rules
You can set a schedule to arm and disarm cameras automatically. Schedules recur weekly.
For example, the schedule for Tuesday repeats every Tuesday as long as the schedule is
turned on. Your cameras are automatically set with this schedule:
• Monday through Friday, 8:00 a.m. to 5:00 p.m. All motion sensors are on.
• All other times. All motion sensors are o.
DRAFT