User's Manual
Table Of Contents
- 1. Get Started
- 2. WiFi Setup and Connections
- 3. Camera Basics
- 4. Modes, Rules, and Alerts
- 5. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Customize the camera spotlight settings
- Adjust the flicker setting
- View device information
- Remove a device from your account
- 6. Troubleshooting
27Modes, Rules, and Alerts
Essential Spotlight Camera
User Manual
Add a schedule
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera.
4. Tap Schedule
.
5. Tap Edit
next to Schedule.
6. Tap + Add.
7. Set the days and times for your new schedule.
Note: To add an overnight schedule such as 8:00 p.m. to 6:00 a.m., you need to add two
separate schedules. First, add 8:00 p.m. to 11:59 p.m., then add 12:00 a.m. to 6:00 a.m.
8. Tap Done.
Edit a schedule
1. Open the Arlo app.
2. Tap Mode.
3. Select your camera.
4. Tap Schedule
.
5. Tap Edit
next to Schedule.
6. Tap a green box.
7. Change the start and stop times and tap Save.
Set up Arlo Geofencing
Geofencing is a virtual fence around a location called a zone. You can use Arlo Geofencing to
arm, disarm, or resume schedule modes when your mobile device is in zone or out of zone.
To set up geofencing, you must use your mobile device and allow the Arlo app to use your
location.
Geofencing accuracy
For accuracy, geofencing uses a combination of GPS, cellular data, and WiFi data. The local
environment aects geofencing:
DRAFT