User's Manual
Table Of Contents
- 1. Get Started
- 2. WiFi Setup and Connections
- 3. Camera Basics
- 4. Modes, Rules, and Alerts
- 5. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Customize the camera spotlight settings
- Adjust the flicker setting
- View device information
- Remove a device from your account
- 6. Troubleshooting
8Get Started
Eseential Spotlight Camera
User Manual
3. Select the camera.
4. Tap Device Utilities > Motion Detection Test.
5. Move in front of the camera.
During this test, the camera LED blinks amber when motion is detected.
6. Move the slider to adjust the motion sensitivity level as needed.
7. Edit the rule for your camera to enter the motion sensitivity level that you want to use. See
Change motion sensitivity on page 23.
Arm your camera to detect motion
You control when your camera detects motion and the rules it uses to record and alert you
by selecting a mode. The Arlo app comes with four modes: Armed, Disarmed, Schedule,
and Geofencing. You can customize each mode and you can also create custom modes. For
information about how to do this, see Chapter 5. Modes, Rules, and Alerts on page 21.
DRAFT