User Manual
Table Of Contents
- 1. Get to Know Your Doorbell
- 2. Get Started
- 3. WiFi Setup and Connections
- WiFi connection options for your doorbell
- Tips for optimal WiFi performance
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Connect an optional Arlo SmartHub
- Connect an optional Arlo Base Station with Siren
- Move your doorbell’s WiFi connection to a SmartHub or base station
- Move your doorbell’s WiFi connection to a direct router connection
- 4. Optional Arlo Chime 2
- 5. Use Your Doorbell
- 6. View and Record Videos
- 7. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Doorbell settings
- Adjust the flicker setting
- Optional SmartHub and Base Station settings
- View device information
- Remove a device from your account
- Restart the doorbell from the Arlo app
- 8. Modes, Rules, and Alerts
- Arm or disarm all your Arlo devices
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Trigger a Chime 2 when the doorbell is pressed
- Change motion sensitivity
- Automatically stop recording when motion stops
- Add a rule with a base station siren trigger
- Manage alerts
- Schedule when your doorbell camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Use your doorbell to trigger a camera to record
- 9. SmartHub SD Card Local Storage
- 10. SmartHub or Base Station USB Local Storage
- 11. Arlo Connect
- 12. Troubleshooting
- The doorbell doesn’t scan the QR code in the Arlo app during setup
- Arlo doesn’t discover your doorbell during setup
- Use Bypass mode for the Power Kit
- Traditional chime doesn’t ring when I press the doorbell
- Doorbell LED doesn’t light
- Power interruption notification
- Remove the doorbell from its mount
- Reset the doorbell
- Can’t see video streams in a browser
- Not receiving push notifications
- Troubleshoot Arlo Geofencing
- Scan the QR code during Chime 2 setup
- Arlo doesn’t discover Chime 2 during setup
- Chime 2 doesn’t ring when the doorbell is pressed
- Reset your Arlo Chime 2
- Verify that an optional SmartHub or base station is online
- The SmartHub or base station is offline
- Reset a SmartHub to factory settings
- Reset a Base Station to factory settings
20WiFi Setup and Connections
Essential Video Doorbell Wired
User Manual
Connect your iOS (Apple) device to a 2.4 GHz network
1. Unlock your device and tap Settings.
2. Tap Wi-Fi, near the top of the list of Settings options.
3. Turn on WiFi by tapping the switch next to Wi-Fi at the top.
Note: WiFi is activated when the switch is green.
4. Select a 2.4 GHz WiFi network.
This is commonly indicated by a 2, 2.4, or 2G at the end of the network name.
5. If prompted, enter the password for the network.
When you’re connected to the WiFi network, a blue check mark appears to the le of the
network name.
Connect your Android device to a 2.4 GHz network
1. Unlock your device and tap Settings.
2. Tap Network & Internet > Wi-Fi.
3. Turn on WiFi by tapping Use WiFi at the top.
4. Select a 2.4 GHz WiFi network.
This is commonly indicated by a 2, 2.4, or 2G at the end of the network name.
5. If prompted, enter the password for the network.
When you’re connected to the WiFi network, the word Connected appears under the
network name.
Connect an optional Arlo SmartHub
Your Video Doorbell can connect to a SmartHub or Base Station with Siren. The SmartHub or
base station uses an Ethernet cable to connect to your router.
Connect a SmartHub
The Arlo app guides you through the steps to install and set up
your Arlo SmartHub.
1. Connect the SmartHub to your router with an Ethernet cable.
2. Connect the AC adapter to the SmartHub and plug it in.
The LED on the front of the SmartHub lights.
SmartHub
VMB5000