User Manual
Table Of Contents
- 1. Get to Know Your Doorbell
- 2. Get Started
- 3. WiFi Setup and Connections
- WiFi connection options for your doorbell
- Tips for optimal WiFi performance
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Connect an optional Arlo SmartHub
- Connect an optional Arlo Base Station with Siren
- Move your doorbell’s WiFi connection to a SmartHub or base station
- Move your doorbell’s WiFi connection to a direct router connection
- 4. Optional Arlo Chime 2
- 5. Use Your Doorbell
- 6. View and Record Videos
- 7. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Doorbell settings
- Adjust the flicker setting
- Optional SmartHub and Base Station settings
- View device information
- Remove a device from your account
- Restart the doorbell from the Arlo app
- 8. Modes, Rules, and Alerts
- Arm or disarm all your Arlo devices
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Trigger a Chime 2 when the doorbell is pressed
- Change motion sensitivity
- Automatically stop recording when motion stops
- Add a rule with a base station siren trigger
- Manage alerts
- Schedule when your doorbell camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Use your doorbell to trigger a camera to record
- 9. SmartHub SD Card Local Storage
- 10. SmartHub or Base Station USB Local Storage
- 11. Arlo Connect
- 12. Troubleshooting
- The doorbell doesn’t scan the QR code in the Arlo app during setup
- Arlo doesn’t discover your doorbell during setup
- Use Bypass mode for the Power Kit
- Traditional chime doesn’t ring when I press the doorbell
- Doorbell LED doesn’t light
- Power interruption notification
- Remove the doorbell from its mount
- Reset the doorbell
- Can’t see video streams in a browser
- Not receiving push notifications
- Troubleshoot Arlo Geofencing
- Scan the QR code during Chime 2 setup
- Arlo doesn’t discover Chime 2 during setup
- Chime 2 doesn’t ring when the doorbell is pressed
- Reset your Arlo Chime 2
- Verify that an optional SmartHub or base station is online
- The SmartHub or base station is offline
- Reset a SmartHub to factory settings
- Reset a Base Station to factory settings
68
10. SmartHub or Base Station
USB Local Storage
The Arlo SmartHub VMB4540 and Base Station with Siren VMB4500 and VMB4000 include one
or two USB ports on the rear panel. If you use your doorbell with a SmartHub or base station,
you can use this feature.
You can connect a USB storage device to the USB port and store your Arlo recordings both in
the cloud and on the USB device.
If the SmartHub or Base Station with Siren isn’t connected to the Internet, recordings
continue to be saved on your USB storage device. If you’re using an active live stream
connection between your wired Arlo Essential Video Doorbell and a SmartHub, you can record
to a USB storage device in 1080p.
Your Arlo app noties you when the connected USB storage device is low on storage space or
is full.
Base station VMB4500
Base station VMB400
SmartHub VMB4540