User Manual
Table Of Contents
- 1. Get to Know Your Doorbell
- 2. Get Started
- 3. WiFi Setup and Connections
- WiFi connection options for your doorbell
- Tips for optimal WiFi performance
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Connect an optional Arlo SmartHub
- Connect an optional Arlo Base Station with Siren
- Move your doorbell’s WiFi connection to a SmartHub or base station
- Move your doorbell’s WiFi connection to a direct router connection
- 4. Optional Arlo Chime 2
- 5. Use Your Doorbell
- 6. View and Record Videos
- 7. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Doorbell settings
- Adjust the flicker setting
- Optional SmartHub and Base Station settings
- View device information
- Remove a device from your account
- Restart the doorbell from the Arlo app
- 8. Modes, Rules, and Alerts
- Arm or disarm all your Arlo devices
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Trigger a Chime 2 when the doorbell is pressed
- Change motion sensitivity
- Automatically stop recording when motion stops
- Add a rule with a base station siren trigger
- Manage alerts
- Schedule when your doorbell camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Use your doorbell to trigger a camera to record
- 9. SmartHub SD Card Local Storage
- 10. SmartHub or Base Station USB Local Storage
- 11. Arlo Connect
- 12. Troubleshooting
- The doorbell doesn’t scan the QR code in the Arlo app during setup
- Arlo doesn’t discover your doorbell during setup
- Use Bypass mode for the Power Kit
- Traditional chime doesn’t ring when I press the doorbell
- Doorbell LED doesn’t light
- Power interruption notification
- Remove the doorbell from its mount
- Reset the doorbell
- Can’t see video streams in a browser
- Not receiving push notifications
- Troubleshoot Arlo Geofencing
- Scan the QR code during Chime 2 setup
- Arlo doesn’t discover Chime 2 during setup
- Chime 2 doesn’t ring when the doorbell is pressed
- Reset your Arlo Chime 2
- Verify that an optional SmartHub or base station is online
- The SmartHub or base station is offline
- Reset a SmartHub to factory settings
- Reset a Base Station to factory settings
89Troubleshooting
Essential Video Doorbell Wired
User Manual
To reset the SmartHub:
1. Use a straightened paper clip to press and hold the Reset button on the back of the
SmartHub for about 10 seconds.
When the SmartHub reset completes, the LEDs on the front of the SmartHub blink amber.
When the LEDs stop blinking amber, your SmartHub reboots. The SmartHub is removed
from your Arlo account.
2. To add the SmartHub and set it up, wait for the LED on the front to light solid blue and
then open the Arlo app.
3. Tap New to Arlo?.
4. Follow the setup instructions.
If your Arlo cameras were paired to the SmartHub, you might need to pair the cameras to
the SmartHub again.
Reset a Base Station to factory settings
You can connect your wired Arlo Essential Video Doorbell directly to your home router’s 2.4
GHz WiFi network, or you can connect your doorbell to an Arlo SmartHub or Base Station with
siren. Your doorbell is compatible with SmartHub model VMB5000 and VMB4540 and Base
Station with Siren model VMB4500 and VMB4000.
Performing a factory reset returns your base station to the default settings. It also removes the
serial number from your Arlo account.