User Manual
Table Of Contents
- 1. Get to Know Your Arlo Video Doorbell
- 2. Get Started
- 3. Use Your Video Doorbell
- 4. View and Record Videos
- 5. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Video Doorbell settings
- Adjust the flicker setting
- View device information
- Remove a device from your account
- Restart the Video Doorbell from the Arlo app
- 6. Modes, Rules, and Alerts
- 7. Troubleshooting
- Video Doorbell doesn’t scan the QR code in the Arlo app during setup
- The Arlo app doesn’t find the doorbell during setup
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Use Bypass mode for the Power Kit
- The chime doesn’t ring when I press the doorbell
- Video Doorbell LED doesn’t light
- Power interruption notification
- Remove the Video Doorbell from its mount
- Reset the Video Doorbell
- Can’t see video streams in a browser
- WiFi signal interference
- Not receiving push notifications
- Troubleshoot Arlo Geofencing
24View and Record Videos
Video Doorbell
User Manual
Motion detection activity zones
With an Arlo Smart subscription, you can designate zones within the doorbell camera
view where you want the camera to detect and record motion.
Add an activity zone
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the Arlo Video Doorbell.
4. Under VIDEO, tap Activity Zones.
5. Tap +.
An activity zone box displays in the camera feed image.
6. Move the zone to the desired position in the camera feed image.
7. To reposition the zone, tap and hold the zone and move it.
8. To customize the zone name, tap Edit
and enter a name.
If you’re using a web browser, click > next to the zone name.
9. Tap Save.
Change an activity zone
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the Arlo Video Doorbell.
4. Under VIDEO, tap Activity Zones.
5. Tap a zone to select it.
6. Move the zone to the desired position in the camera feed image.
7. To reposition the zone, tap and hold the zone and move it.
8. To customize the zone name, tap Edit
and enter a name.
If you’re using a web browser, click > next to the zone name.
9. Tap Save.