User Manual
Table Of Contents
- 1. Get to Know Your Arlo Video Doorbell
- 2. Get Started
- 3. Use Your Video Doorbell
- 4. View and Record Videos
- 5. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Video Doorbell settings
- Adjust the flicker setting
- View device information
- Remove a device from your account
- Restart the Video Doorbell from the Arlo app
- 6. Modes, Rules, and Alerts
- 7. Troubleshooting
- Video Doorbell doesn’t scan the QR code in the Arlo app during setup
- The Arlo app doesn’t find the doorbell during setup
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Use Bypass mode for the Power Kit
- The chime doesn’t ring when I press the doorbell
- Video Doorbell LED doesn’t light
- Power interruption notification
- Remove the Video Doorbell from its mount
- Reset the Video Doorbell
- Can’t see video streams in a browser
- WiFi signal interference
- Not receiving push notifications
- Troubleshoot Arlo Geofencing
34Change Your Settings
Video Doorbell
User Manual
4. Tap the friend, and tap Edit .
5. Tap cameras to select or deselect them.
6. Tap Allow Access Rights.
Selecting Allow Access Rights allows this friend to change your account and
camera settings.
7. Tap Done.
Delete a friend
1. Open the Arlo app.
2. Tap Settings.
3. Under ACCOUNT, tap Grant Access.
4. Select the friend, and tap Edit
.
5. Tap Delete Friend.
6. Tap Yes.
Change the time zone
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the Arlo Video Doorbell.
4. Tap Time Zone.
5. Tap a time zone.
If you’re using a mobile device, your settings are saved.
6. If you’re using a computer, click Save.
Video Doorbell settings
You can view or change the settings for your doorbell using either of these methods:
• Tap Settings > My Devices and select the doorbell.
• Tap the gear icon
below the doorbell’s camera feed.