User Manual

48Modes, Rules, and Alerts
Video Doorbell
User Manual
This is the Arlo device that performs an action when the trigger device detects
motion or sound. You can select the same Arlo device you’re using as a trigger or
a different Arlo device.
11. Select an action and tap Next.
You can select Record video,or Do nothing.
If you’re using a computer web browser, you can also specify the recording time
setting.
12. Select the notications for Arlo to send when motion or audio is detected and
then tap Next.
13. Review your settings and tap Save.
Use your Video Doorbell to trigger a
camera to record
You can set up a rule so that your Video Doorbell triggers an Arlo camera to start
recording when the doorbell detects motion. For example, you can trigger an Arlo
wire-free camera overlooking your front entry to record, even if the camera doesn’t
detect motion. You can trigger an indoor Arlo camera to record, to ensure no one
enters your home.
1. Open the Arlo app.
2. Tap the Arlo Video Doorbell.
3. Tap the menu on the upper-right corner of the page to open it.
4. Tap Motion settings.
5. To receive alerts when your doorbell detects motion, tap Motion Triggered
Alerts.
6. Tap Add Device.
7. Tap Camera and then tap Next.
8. Tap Record video and then tap Next.
For the recording settings, you can choose one of these options:
• Record until activity stops (up to 300 sec)
• Record for a xed length of time (then use the slider to select the number of
seconds from 10 to 120.)