User Manual

12Get Started
Pro 3 Floodlight Camera
User Manual
When mounting your oodlight:
• Place your oodlight about 8-10 feet (2.5-3 meters) o the ground.
• Tilt your oodlight about 40° toward the ground, and further adjust the angle based on
the height and location.
• Make sure that the oodlight camera’s eld of view is clear of nearby walls and other
obstructions. A nearby wall can cause a bright reection from the oodlight.
Prep: What you need for wall mounting
Your oodlight comes with a wall plate, screws, and wall anchors that are designed for wall
mounting. If you want to mount your oodlight on a ceiling, we recommend using the ceiling
adapter, sold separately. See Install the ceiling adapter (sold separately) on page 14.
What you need for wall-mounting.
• A power drill with a 15/64 in. (6 mm) drill bit
• A Phillips screwdriver
• A pencil
• The wall plate, screws, and wall anchors that came in the package with your Pro 3
Floodlight Camera.
WARNING: Mount your camera onto a at, supportive surface.
When mounting your camera, select a mounting surface that can support the weight of
your camera with the battery installed. Mounting your camera in an unstable location might
create a hazardous situation or damage your product, which might not be covered by Arlo’s
warranty.
Wall-mount your oodlight
The Arlo app guides you through the installation process for your oodlight. For the best
experience, we recommend that you wait until the Arlo app tells you to mount your oodlight
before you begin the mounting process.
1. Press the battery access button on the bottom of
the oodlight and separate the camera from the
camera housing.
This makes mounting easier, and it allows you
to charge the camera while you’re mounting the
camera housing.
Battery access
button