User Manual
Table Of Contents
- 1. Get to Know Your Pro 3 Floodlight Camera
- 2. Get Started
- Setup: Use the Arlo app
- Prep: Insert the battery
- Prep: Check the LED
- Prep: Find a good location for your floodlight
- Prep: What you need for wall mounting
- Wall-mount your floodlight
- Prep: Install the ceiling adapter (sold separately)
- Check your floodlight’s field of view
- Test motion detection
- Arm your Floodlight Camera
- Reposition your floodlight after mounting
- HEVC 2K playback-supported devices
- 3. WiFi Setup and Connections
- WiFi connection options for your floodlight
- Tips for optimal WiFi performance
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Connect an optional Arlo SmartHub
- Connect an optional Arlo Base Station with Siren
- Move your floodlight’s WiFi connection to a SmartHub or base station
- Move your floodlight’s WiFi connection to a direct router connection
- 4. Use Your Floodlight Camera
- Manually turn your floodlight on and off
- View your camera feeds
- Record clips from live video
- Take a snapshot from live video
- CVR with an optional Arlo SmartHub or base station
- Customize your camera feed image
- Motion detection activity zones
- Talk and Listen
- Turn the siren on and off manually
- View recordings and snapshots
- Download recordings
- 5. Modes, Rules, and Alerts
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Change the light duration for a rule that doesn’t record
- Automatically stop recording when motion stops
- Change audio sensitivity
- Use a rule to turn on the floodlight
- Use a rule to activate the floodlight’s siren
- Add a rule with an optional base station siren trigger
- Manage alerts
- Schedule when your floodlight is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- 6. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Change the light settings
- Camera settings
- Video Settings
- Audio settings
- Adjust the flicker setting
- View device information
- Remove a device from your account
- Restart the floodlight from the Arlo app
- Optional SmartHub and Base Station settings
- 7. SmartHub SD Card Storage
- 8. SmartHub or Base Station USB Storage
- 9. Arlo Connect
- 10. Arlo XL Rechargeable Battery
- 11. Troubleshooting
35Modes, Rules, and Alerts
Pro 3 Floodlight Camera
User Manual
Select a mode
You can select a mode or set modes to activate according to a schedule.
1. Open the Arlo app.
2. Tap Mode.
3. Tap the oodlight or your optional Arlo SmartHub or base station, if you use one.
A list of modes displays.
4. Tap a mode to activate it.
The mode turns on immediately. The mode stays active until you change it.
Mute Notications
Mute Notications temporarily silences push notications to your mobile device, while videos
continue to be recorded. This is great for a party when you don’t need to be notied of friends
in your backyard.
You can mute notications from the Arlo app. If you use Arlo Secure, you can also activate
Mute Notications directly from push notications.
To mute notications:
1. Open the Arlo app.
2. Tap Settings > Mute Notications.
3. Select the length of time to mute notications.
A message displays conrming that you are muting notications. The Mute Notication
status shows the amount of remaining time until notications resume.
To unmute notications
1. Open the Arlo app.
2. Tap Settings > Mute Notications > Unmute.
The Mute Notications status changes to O.