Home Security System Quick Reference Guide
Using this guide Table of Contents The Arlo Secure App guides you through installation and setup and lets you manage your Arlo account and devices. This Quick Reference Guide explains how the Arlo Home Security System works after setup and installation are finished. Professional Monitoring or Self Monitoring................
Get to Know Your Home Security System WiFi SecureLink Cellular Arlo Secure App Arlo All-In-One Sensor Motion, open/close, water leak, temperature, light, tilt, smoke g1 and CO alarm listening Arlo SmartCloud and 24/7 Professional Monitoring Internet Service Provider WiFi Router Arlo Keypad Sensor Hub 1 Motion, smoke and CO alarm listening, and Arlo SecureLink 1 Arlo Pro 5 (Optional, sold separately) Cellular Network Arlo Cellular and Battery Backup Cellular backup during internet or power outage
Professional Monitoring or Self Monitoring Get to Know Your Keypad Sensor Hub Arlo Professional Monitoring service can alert 24/7 Live Security Experts when a security event occurs at your home.1 The Keypad Sensor Hub lets you change security modes of your security system to: Arm Away, Arm Home and Standby, turn the integrated siren on and off, and request assistance from a 24/7 Live Security Expert.1 The Keypad Sensor Hub also includes a motion sensor, and a microphone that listens for smoke/CO alarms.
Keypad Sensor Hub Placement Tips Keypad Sensor Hub Buttons Sensing Element Positions and placements for best performance Armed Away: Use this mode for security when no one is inside the home. Open access and indoor motion detection will trigger the alarm by default. Motion Lay flat in a horizontal position Armed Home: Use this mode for security when someone is home. Open access will trigger the alarm by default, while motion detection inside the home will not.
Keypad Sensor Hub LED Behavior Situation LED Behavior Powering On/Startup Mode buttons cycle in white Ready for setup All buttons pulsate white Firmware update in progress Numeric columns cycle in white Optional Cellular and Battery Backup The Arlo Cellular and Battery Backup device (sold separately) is an optional accessory that connects to the Keypad Sensor Hub.
Get to Know Your All-In-One Sensor All-In-One Sensor Placement Tips Eight sensing functions allow you to place the Sensor anywhere you need coverage inside your home. One or more functions can be selected via the Arlo Secure App. Detection Type Positions and placements for best performance Motion Vertical position Place or mount 5.9 ft. (1.
All-In-One Sensor Placement Tips Detection Type Positions and placements for best performance Ambient light Any position All-In-One Sensor Battery Replacement The All-In-One Sensor uses a coin cell CR2477 lithium battery. 1. To access the battery compartment, slide the front cover of the All-In-One Sensor down and lift it off the back housing.
All-In-One Sensor Sync Button Functions All-In-One Sensor LED Behavior The Sync button performs different tasks depending on whether you are setting up the Sensor or applying functional changes. Each Sensor has one LED located under the front face which lights up to indicate status events. Press this button to...
Security PIN Types Primary PIN: Created during initial setup – required for security system. Can be edited, but not disabled. Secondary PIN1: Optional PINs for family or visitors. Can be edited, scheduled for restricted access only during certain days/times, or disabled. Duress PIN1: Optional PIN to silently request for police. Can be edited or deleted.
Changing Security System Modes To change the security system mode from the Keypad 1. Press the desired mode button. 2. If a PIN is required for that mode, enter the PIN, and press the Check button.
Device Warnings Device Warnings When changing your security system to Arm mode, a warning is issued if one or more devices enabled with panic actions are: To Override a Device Warning: Via Arlo Secure App • Offline • Online, and being used for open/close detection, but a door or window is open Your security system will not Arm, unless you override the device warning (via the Arlo Secure App or keypad) or address the problem before proceeding.
Create or Cancel a Panic Alarm Create or Cancel a One-touch Emergency Response Request for assistance from 24/7 Live Security Expert1, while also activating siren capable devices, and light capable devices at your location by default. You can customize the Panic Alarm in the Arlo Secure App. Request Fire, Medical, or Police emergency responders to your location without activating siren capable devices.
Create Non-Cancellable Duress Alarm Tips to Prevent False Alarms Silently request police without indicating to an intruder that you have initiated an Emergency Response.1 For your own safety, a 24/7 Live Security Expert will immediately send police to your location, without standard verification or communication via text or phone call. You will also not receive any notifications through the Arlo Secure App.
© Arlo Technologies, Inc., Arlo and the Arlo logo are trademarks of Arlo Technologies, Inc. Any other trademarks are for reference purposes. Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à arlo.com/docs. (If this product is sold in Canada, you can access this document in Canadian French at arlo.com/docs.) For regulatory compliance information including the EU Declaration of Conformity, visit www.arlo.com/about/regulatory/. Arlo Technologies, Inc.
