User Manual

16
3. WiFi Setup and Connections
When you install and set up your camera, the Arlo app guides you through the process of
connecting the camera to your router’s 2.4 GHz WiFi network or to an optional Arlo SmartHub
or base station.
WiFi connection options
When you install your camera you can connect it directly to your router’s 2.4 GHz WiFi band, or
you can connect the camera with WiFi to an Arlo SmartHub VMB5000 or VMB4540, or an Arlo
base station VMB4500 or VMB4000.
An Arlo SmartHub or base station isn’t included in the package with your camera. They are
sold separately. Using your camera with a SmartHub or base station gives you access to these
additional features:
• Use local storage on an SD card in a VMB5000 SmartHub or on a USB storage device
connected to the SmartHub VMB4540 or base station VMB4500 or VMB4000.
• Use direct storage access for SmartHubs VMB5000 and VMB4540.
Aer you install and set up your camera, you can move its WiFi connection from your router
to a SmartHub or base station. You can also move your camera’s WiFi connection from a
SmartHub or base station and connect it directly to your router’s 2.4 GHz WiFi band. To do
this, you must remove the device from your account and reinstall through the Arlo app,
selecting the appropriate option to move back and forth.
Tips for optimal WiFi performance
The distance between WiFi devices can aect the WiFi signal:
• Maximum recommended distance. We recommend that you place your WiFi router within
300 feet (90 meters) of the camera. The maximum line-of-sight range of 300 feet is reduced
by each wall, ceiling, or other major obstruction between the camera and the router.
• Minimum recommended distance. To reduce WiFi interference, allow at least 6½ feet (2
meters) between your camera and any Arlo cameras that you install.