User Manual
Table Of Contents
- 1. Get to Know Your Essential Series Camera
- 2. Get Started
- Use the Arlo app for installation and setup
- Charge your camera indoors
- Use the sync button to wake the camera
- Check the LED
- Find a good location for your camera
- Wall mount your camera
- Connect an optional Essential Solar Panel (sold separately)
- Test motion detection
- Position your camera to detect motion in specific areas
- Arm your camera to detect motion
- 3. WiFi Setup and Connections
- 4. Use Your Essential Series Camera
- 5. Modes, Rules, and Alerts
- Arm or disarm all your Arlo devices
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Control whether the spotlight turns on when motion is detected
- Use a rule to activate the camera’s siren
- Add a rule with an optional base station siren trigger
- Manage alerts
- Schedule when your camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Custom modes
- 6. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Video Settings
- Adjust the audio settings
- Adjust the flicker setting
- Restart the camera from the Arlo app
- View device information
- Remove a device from your account
- Optional SmartHub and Base Station settings
- 7. SmartHub SD Card Storage
- 8. SmartHub or Base Station USB Storage
- 9. Arlo Connect
- 10. Troubleshooting
57Smar tHub or Bas e Station USB Storage
Arlo Essential Series Wire-Free Camera
User Manual
Change the USB device overwrite setting
By default, if the USB storage device lls up, the oldest Arlo recording is erased to make
room for new recordings. Files on the USB device that aren’t in the Arlo folder aren’t deleted
to make room for Arlo recordings. You can change the setting so that no Arlo recordings are
automatically erased.
1. Open the Arlo app.
2. Tap Base Station & Bridge > Storage Settings.
3. Tap Overwrite Automatically.
The overwrite setting toggles o and on.
Format a USB device
The Arlo app displays a pop-up message to let you know if it is necessary to format the USB
storage device. The SmartHub can format the USB storage device.
Do not remove the USB storage device while it is formatting. The USB storage device might
become permanently unusable.
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge > Local Storage.
If you see the message Requires Formatting, the USB storage device isn’t in the correct
format and you must format it before you can use it for local storage.
3. Tap the Format USB Device button.
4. Wait for USB Device Status to change from Formatting to Ready.
Safely eject a USB storage device
If you remove a USB device while information is being recorded on it, the USB device might
become permanently unusable or the les on the USB device might be corrupted.
1. Open the Arlo app.
2. Tap SmartHub/Base Station/Bridge > Local Storage.
3. Tap Safely Eject USB Device.
4. Wait for the Unmounting USB storage device progress message to close.
5. Disconnect your USB storage device from your SmartHub.