User Manual

37
Modes, Rules, and Smart Alerts
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the camera.
The Mode page displays.
4. Click or tap a mode to activate it.
The mode that you selected turns on immediately. The mode stays active until
you change it.
When you view the Cameras page, the active icons that display at the top of the
camera feed are based on the currently selected mode. When motion detection is
on, the
Motion icon displays.
Change Motion Sensitivity
You can easily change the sensitivity level for cameras.
¾ To change the sensitivity level for a camera:
1. Tap the Arlo icon on your mobile device.
If you are using a computer, enter arlo.netgear.com in the address bar of a
browser.
The Cameras page displays.
2. Click or tap Mode.
A list of cameras displays.
3. Click or tap the camera.
The Mode page displays.
4. Click or tap Edit
next to the mode.
The Edit page displays.
5. Click or tap Edit
next to the rule that you want to edit.
The Edit Rule page displays.
6. Under If the following, click or tap Edit
next to Motion is detected.