User Manual
Table Of Contents
- 1. Get to Know Your Camera
- 2. Get Started
- Use the Arlo app
- Insert the battery
- Check the LED
- Find a good location for your camera
- Wall-mount your camera with the magnetic mount
- Install an optional outdoor mount (sold separately)
- Install an XL rechargeable battery and housing (sold separately)
- Install a Total Security Mount (sold separately)
- Check your camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera
- HEVC 2K playback-supported devices
- 3. WiFi Setup and Connections
- WiFi connection options for your camera
- Tips for optimal WiFi performance
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Connect an optional Arlo SmartHub
- Connect an optional Arlo Base Station with Siren
- Move your camera’s WiFi connection to a SmartHub or base station
- Move your camera’s WiFi connection to a direct router connection
- 4. Use your Pro 4 Spotlight Camera
- Turn the camera spotlight on and off manually
- Foresight
- Record clips from live video
- Take a snapshot from live video
- CVR with an optional Arlo SmartHub or base station
- Customize your camera feed image
- Motion detection activity zones
- 2-Way Audio
- Turn the camera siren on and off manually
- View recordings and snapshots
- Download recordings
- 5. Modes, Rules, and Alerts
- Arm or disarm all your Arlo devices
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Use a rule to activate the the camera’s siren
- Add a rule with an optional base station siren trigger
- Manage alerts
- Schedule when your camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Detect audio alarms with your camera
- 6. Change Your Settings
- Two-step verification
- Use face or fingerprint authentication
- Customize your profile
- Change your Arlo password
- Reset a forgotten password
- Grant access to friends
- Change the time zone
- Camera settings
- Video Settings
- Change the audio settings
- Adjust the flicker setting
- Restart the camera from the Arlo app
- View device information
- Remove a device from your account
- 7. SmartHub or Base Station USB Storage
- 8. SmartHub SD Card Storage
- 9. Arlo Connect
- 10. Arlo Rechargeable Battery
- 11. Troubleshooting
80Arlo Rechargeable Battery
Pro 4 Spotlight Camera
User Manual
the battery next to areas which may become hot. Examples include, but are not limited to,
on or near a space heater, cooking surface, cooking appliance, iron, radiator, or replace.
• DO NOT get the battery or the Arlo device wet. Even though they might dry and appear to
operate normally, the circuitry can slowly corrode and defeat its safety circuitry.
• DO NOT place the battery in a pocket, purse, or other receptacle containing metal objects,
such as keys, jewelry, or tools.
• DO NOT store the battery with hazardous or combustible material. Store in a cool, dry,
ventilated area.
• ALWAYS keep the battery away from children.
• DO NOT load the battery backwards. MAKE SURE the battery compartment is empty and
free of any moisture or loose debris before inserting the battery.
• AVOID dropping the battery or the Arlo device. Dropping it, especially on a hard surface,
might cause damage to the battery or the Arlo device. If you suspect damage to the
battery or the Arlo device, replace it.
• ALWAYS follow the directions in the Quick Start Guide and/or written in the Arlo Product
User Manual.
• ALWAYS follow local waste and recycling laws and guidelines to dispose of used batteries.