User Manual
Table Of Contents
- 1. Get to Know Your Camera
- 2. Get Started
- Use the Arlo app
- Insert the battery
- Check the LED
- Find a good location for your camera
- Wall-mount your camera with the magnetic mount
- Install an optional outdoor mount (sold separately)
- Install an XL rechargeable battery and housing (sold separately)
- Install an Anti-Theft Mount (sold separately)
- Check your camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera
- HEVC 2K playback-supported devices
- 3. WiFi Setup and Connections
- WiFi connection options for your camera
- Tips for optimal WiFi performance
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Connect an optional Arlo SmartHub
- Connect an optional Arlo Base Station with Siren
- Move your camera’s WiFi connection to a SmartHub or base station
- Move your camera’s WiFi connection to a direct router connection
- 4. Use your Pro 4 Spotlight Camera
- Turn the camera spotlight on and off manually
- Foresight
- Record clips from live video
- Take a snapshot from live video
- CVR with an optional Arlo SmartHub or base station
- Customize your camera feed image
- Motion detection activity zones
- 2-Way Audio
- Turn the camera siren on and off manually
- View recordings and snapshots
- Download recordings
- 5. Modes, Rules, and Alerts
- Arm or disarm all your Arlo devices
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Use a rule to activate the the camera’s siren
- Add a rule with an optional base station siren trigger
- Manage alerts
- Schedule when your camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Detect audio alarms with your camera
- 6. Access Your Arlo Account
- 7. Change Your Settings
- 8. SmartHub or Base Station USB Storage
- 9. SmartHub SD Card Storage
- 10. Arlo Connect
- 11. Arlo Rechargeable Battery
- 12. Troubleshooting
14Get Started
Pro 4 Spotlight Camera
User Manual
• Align the small screw on the mount and the dot on the wall plate.
• Turn the housing clockwise, until it clicks in place.
• Use the security key to tighten the small screw.
Note: The security key came in the package with your Anti-The Mount.
6. Adjust your camera position, then nger-tighten the mount lock (clockwise) to lock the
camera in position.
Note: To release your camera from the housing, insert the security key in the security keyhole
and turn the key clockwise.
Check your camera’s eld of view
The eld of view is the area in which the camera can detect motion. You can set the eld of
view to Full (110 degrees), Wide (125 degrees), or Super Wide (160 degrees).