User Manual
Table Of Contents
- 1. Get to Know Your Camera
- 2. Get Started
- Use the Arlo app
- Insert the battery
- Check the LED
- Find a good location for your camera
- Wall-mount your camera with the magnetic mount
- Install an optional outdoor mount (sold separately)
- Install an XL rechargeable battery and housing (sold separately)
- Install an Anti-Theft Mount (sold separately)
- Check your camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera
- HEVC 2K playback-supported devices
- 3. WiFi Setup and Connections
- WiFi connection options for your camera
- Tips for optimal WiFi performance
- Connect your mobile device to a 2.4 GHz WiFi network during setup
- Connect an optional Arlo SmartHub
- Connect an optional Arlo Base Station with Siren
- Move your camera’s WiFi connection to a SmartHub or base station
- Move your camera’s WiFi connection to a direct router connection
- 4. Use your Pro 4 Spotlight Camera
- Turn the camera spotlight on and off manually
- Foresight
- Record clips from live video
- Take a snapshot from live video
- CVR with an optional Arlo SmartHub or base station
- Customize your camera feed image
- Motion detection activity zones
- 2-Way Audio
- Turn the camera siren on and off manually
- View recordings and snapshots
- Download recordings
- 5. Modes, Rules, and Alerts
- Arm or disarm all your Arlo devices
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Use a rule to activate the the camera’s siren
- Add a rule with an optional base station siren trigger
- Manage alerts
- Schedule when your camera is armed
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Detect audio alarms with your camera
- 6. Access Your Arlo Account
- 7. Change Your Settings
- 8. SmartHub or Base Station USB Storage
- 9. SmartHub SD Card Storage
- 10. Arlo Connect
- 11. Arlo Rechargeable Battery
- 12. Troubleshooting
15Get Started
Pro 4 Spotlight Camera
User Manual
Arlo automatically corrects the image to reduce the sheye eect for each eld of view
setting.
Change the eld of view
You can set the eld of view to Full (110 degrees), Wide (125 degrees), or Super wide (160
degrees).
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Select the camera.
4. Tap Video Settings > Video Mode.
5. Tap a eld of view to automatically apply it to your camera.
Position your camera to detect motion in
specic areas
You can mount and aim your Pro 4 Spotlight Camera in dierent ways to optimize the
camera’s ability to detect motion in specic areas. The lower two-thirds of the camera’s eld
of view is the motion-sensitive part of the image. Aim the camera so that any motion you wish
to detect appears within this part of the image.
If you want to monitor motion closer to the
camera, such as visitors to your front door,
mount the camera at least 6.5 feet (1.9
meters) high
*
and aim it so that visitors
appear in the lower two-thirds of the image.
*At 6.5 feet (2 meters) or higher, we recommend using the Arlo Outdoor Mount.
110°
125°
160°