User Manual
Table Of Contents
- 1. Get to Know Your Ultra 2 Camera
- 2. Get Started
- Use the Arlo app for installation and setup
- Connect your SmartHub to the Internet
- Connect a Base Station with Siren
- Insert the battery into your camera
- The camera battery
- The Arlo Ultra Camera LED
- Tips for optimal WiFi performance
- Magnetic mount
- Install the Arlo Outdoor Mount
- Install an Anti-Theft Mount
- Connect your camera to the Arlo solar panel (sold separately)
- Your Arlo Ultra camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera to detect motion
- 3. Arlo Ultra Basics
- 4. Access your Arlo account
- 5. Ultra Image Quality Features
- 6. Modes, Rules, and Alerts
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Add a rule with a base station siren trigger
- Manage alerts
- Schedule your camera rules
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Custom modes
- Detect audio alarms with your Ultra camera
- 7. Change Your Arlo Settings
- 8. Use SD Card Storage
- 9. USB Storage
- 10. Arlo Connect
- 11. FAQs and Troubleshooting
- FAQs
- Battery FAQs
- The Arlo app doesn’t recognize my device
- Troubleshoot two-step verification
- Activity zones and CVR aren’t working
- Troubleshoot Arlo Geofencing
- Can’t see video streams in a browser
- WiFi signal interference
- Not receiving push notification alerts
- Arlo Smart Alarm Detection isn’t working
- Verify that the SmartHub or base station is online
- The SmartHub or base station is offline
- Reset the SmartHub to factory settings
- Reset a Base Station to factory settings
- 12. Rechargeable Battery Safety
59Change Your Arlo Settings
Ultra Series 4K UHD Wire-Free Security Camera System
User Manual
6. Tap Save.
Turn on Auto Zoom and Tracking
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Video Settings.
5. Tap Auto Zoom and Tracking.
Turn o the camera LED
The LED on the camera lights in dierent colors. (See The Arlo Ultra Camera LED on page
51.) You can turn o this LED.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Camera LED.
5. Tap Battery Fully Charged Indicator to turn the LED o and on.
If you’re using a mobile device, your settings are saved.
6. If you’re using a computer, click Save.
Change the video quality and battery usage
You can set the video resolution as Best Video, Optimized, or Best Battery Life. Using the Best
Battery Life setting reduces the WiFi bandwidth that is required.
1. Open the Arlo app.
2. Tap Settings > My Devices.
3. Tap the camera.
4. Tap Video Settings > Power Management.
5. Tap to select Best Battery Life, Optimized, or Best Video.