Quick Start Guide

76
2. Press the Sync button on the top of the base station for about two
seconds.
3. Release the button.
4. Wait for the Sync Status LED to blink green.
5. Press the Sync button on top of the camera
for about two seconds.
6. Release the button.
The LED lights as follows:
• A blue LED on the camera blinks slowly
when the sync process starts.
• The blue LED blinks rapidly to confirm sync.
• The LED blinks amber if the sync is not
successful.
If the LED blinks amber, you must repeat
the sync process.
Note: Arlo’s range varies depending on environmental factors, including
physical obstructions, construction materials, and wireless
interference.