User Manual

13Get Started
Pro 3 Wire-Free Security Camera System
User Manual
Magnetic mount
Your Arlo Pro 3 system comes with a magnetic-based camera mount that lets you
mount your cameras anywhere. The mount has a built in groove where you can hide
your cable and provide strain relief if you want to keep the camera mounted and
plugged into a wall source.
Install a magnetic mount
1. Select a location for the mount up to 6.5
feet (1.9 meters) high.
*
2. Fasten the mouting screw into a wall.
If you’re working with drywall, use the
plastic drywall anchor that we provide.
Use the plastic stopper to help guide how
far to screw it into the wall.
3. If you’re using your Arlo Pro 3 Camera
connected to a charging cable, wrap the
excess charging cable around the back of
the mount.
4. Snap the magnetic mount onto the screw
and the stopper.
The mount clicks into place.
5. Attach your camera to the wall mount.
The magnet in the mount holds the
camera onto the mount.
6. Adjust the camera to your preferred
viewing angle.
Note: You can replace the battery in your
camera without removing the camera housing
from the mount.
*At 6.5 feet (2 meters) or higher, we recommend using the Arlo Outdoor Mount.