User Manual
Table Of Contents
- 1. Get to Know Your Arlo Pro 3 Camera
- 2. Get Started
- Connect your SmartHub to the Internet
- The SmartHub LED
- Use the Arlo app for installation and setup
- Insert the battery into your camera
- The camera battery
- The Arlo Pro 3 Camera LED
- Tips for optimal WiFi performance
- Magnetic mount
- Install the Arlo Outdoor Mount
- Connect your camera to the Arlo solar panel (sold separately)
- Your Arlo Pro 3 Camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera to detect motion
- 3. Arlo Pro 3 Basics
- 4. Image Quality Features
- 5. Modes, Rules, and Alerts
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Manage alerts
- Schedule your camera rules
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Detect audio alarms with your Pro 3 Camera
- 6. Change Your Settings
- 7. USB Storage
- 8. Arlo Connect
- 9. FAQs and Troubleshooting
- 10. Rechargeable battery safety
18Get Started
Pro 3 Wire-Free Security Camera System
User Manual
4. Tap Device Utilities > Motion Detection Test.
5. Move in front of the camera.
During this test, the camera LED blinks amber when motion is detected.
6. Move the slider to adjust the motion sensitivity level as needed.
7. Edit the rule for your camera to enter the motion sensitivity level that you want to
use. See Change motion sensitivity on page 35.
Arm your camera to detect motion
You control when your camera detects motion and the rules it uses to record and alert
you by selecting a mode. The Arlo app comes with four modes: Armed, Disarmed,
Schedule, and Geofencing. You can customize each mode and you can also create
custom modes. For information about how to do this, see Chapter 5. Modes, Rules,
and Alerts on page 33.