User Manual

35Modes, Rules, and Alerts
Pro 3 Wire-Free Security Camera System
User Manual
Rules for modes
Each mode uses one or more rules to control your Arlo system. You can set these
options.
• Trigger device. The trigger device is the camera that detects motion or sound.
You can adjust the motion and sound sensitivity to minimize false alarms.
• Action device. The action device responds to motion or sound detection on
the trigger device. For example, you might want your backyard camera or your
driveway camera to trigger your door camera to start recording video. You decide
what action each camera takes when motion or sound is detected.
• Notications. When a trigger is detected, the Arlo can send you push
notications, email alerts, or both. You can also send email alerts to friends, family
members, pet sitters, or anyone who might need to respond when a camera is
triggered.
Change motion sensitivity
You can edit a rule to change the motion sensitivity level for your cameras.
1. Open the Arlo app.
2. Tap Mode.
3. Tap the SmartHub.
4. Tap Edit
next to the mode.
5. Tap Edit
next to the rule.
6. Under If the following, tap Edit
next to Motion is detected.
7. Move the slider to adjust the sensitivity level for motion detection for this camera.
If you used a mobile device to specify the settings, your settings are saved.
8. If you used a browser to specify the settings, click Save.
Automatically stop recording when motion
stops
1. Open the Arlo app.
2. Tap Mode.