User Manual
Table Of Contents
- 1. Get to Know Your Arlo Pro 3 Camera
- 2. Get Started
- Connect your SmartHub to the Internet
- The SmartHub LED
- Use the Arlo app for installation and setup
- Insert the battery into your camera
- The camera battery
- The Arlo Pro 3 Camera LED
- Tips for optimal WiFi performance
- Magnetic mount
- Install the Arlo Outdoor Mount
- Connect your camera to the Arlo solar panel (sold separately)
- Your Arlo Pro 3 Camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera to detect motion
- 3. Arlo Pro 3 Basics
- 4. Image Quality Features
- 5. Modes, Rules, and Alerts
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Manage alerts
- Schedule your camera rules
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Detect audio alarms with your Pro 3 Camera
- 6. Change Your Settings
- 7. USB Storage
- 8. Arlo Connect
- 9. FAQs and Troubleshooting
- 10. Rechargeable battery safety
37Modes, Rules, and Alerts
Pro 3 Wire-Free Security Camera System
User Manual
6. Move the slider to the desired level of audio detection.
If you used a mobile device to specify the settings, your settings are saved.
7. If you used a browser to specify the settings, click Save.
Manage alerts
Arlo can push notications to your smartphone, send you email alerts, or do both. To
receive Arlo notications on your phone, you must install the Arlo app on your phone.
Note: If you log out of the Arlo app on your smartphone or mobile device, you will
stop receiving push notications.
1. Open the Arlo app.
2. Tap Mode.
3. Tap the SmartHub.
4. Tap Edit
next to the mode.
Note: The Disarmed mode does not send alerts.
5. Under Alert, tap Push Notication to turn alerts on and off for your mobile device.
6. Under Alert, tap Email Alerts to turn email notications on and off.
7. To specify an email address, tap Edit
next to Email Alerts and enter the email
address.
For information about Arlo Smart Alarm Detection, see Detect audio alarms with your
Pro 3 Camera on page 43.
Schedule your camera rules
You can set a schedule to arm and disarm cameras automatically. Schedules recur
weekly. For example, the schedule for Tuesday repeats every Tuesday as long as the
schedule is turned on. Your cameras are automatically set with this schedule:
• Monday through Friday, 8:00 a.m. to 5:00 p.m. All motion sensors are on.
• All other times. All motion sensors are off.