User Manual

46Modes, Rules, and Alerts
Pro 3 Wire-Free Security Camera System
User Manual
Test the Alarm Detection range
After a successful compatibility test, we recommend that you test the Alarm Detection
range when you move your camera to a different location.
1. Place your Arlo Pro 3 Camera in the desired location.
2. Open the Arlo app.
3. Make sure that your Pro 3 Camera is in Armed mode or another mode in which it
can detect sound and motion.
4. Make sure that you selected Smoke/CO Alarm in the Audio Alerts setting for your
camera and that Other Audio is turned off.
5. Close the Arlo app, but don’t log out.
6. Use the test button on your smoke or carbon monoxide detector to activate the
alarm for 30 seconds.
7. After a successful test, aim the camera toward the area of highest interest so that
you can view the relevant videos when you get a notication.
Turn off audio detection
Audio detection must be turned on if you’re using audio alerts so that your camera
wakes up when there is a sound. To turn off audio detection, you must rst turn off
Audio Alerts.
1. Open the Arlo app.
2. Tap Settings > Smart Notications.
3. Select a camera.
4. In the Audio Alerts section, deselect the slider next to Smoke/CO Alarm and All
Other Audio settings.
5. Return to Settings.
6. Tap Smart Notications, and deselect the slider next to Detects Audio.
Turn off push notications after using audio detection
Push notications must be turned on when you’re using Arlo Smart audio detection.
After you turn off audio detection and audio alerts, you can edit rules to turn off push
notications. (See Turn off audio detection and audio alerts on page 46.)