User Manual
Table Of Contents
- 1. Get to Know Your Arlo Pro 3 Camera
- 2. Get Started
- Connect your SmartHub to the Internet
- The SmartHub LED
- Use the Arlo app for installation and setup
- Insert the battery into your camera
- The camera battery
- The Arlo Pro 3 Camera LED
- Tips for optimal WiFi performance
- Magnetic mount
- Install the Arlo Outdoor Mount
- Connect your camera to the Arlo solar panel (sold separately)
- Your Arlo Pro 3 Camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera to detect motion
- 3. Arlo Pro 3 Basics
- 4. Image Quality Features
- 5. Modes, Rules, and Alerts
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Manage alerts
- Schedule your camera rules
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Detect audio alarms with your Pro 3 Camera
- 6. Change Your Settings
- 7. USB Storage
- 8. Arlo Connect
- 9. FAQs and Troubleshooting
- 10. Rechargeable battery safety
50Change Your Settings
Pro 3 Wire-Free Security Camera System
User Manual
Use face or ngerprint authentication
You can use Touch ID® or Face ID® with a compatible Apple device. With a
compatible Android device, you can use ngerprint authentication.
Your device must meet the following minimum requirements:
• Apple devices:
iOS version 10.3 or higher
A Touch ID compatible device (iPhone 5s, iPad Air 2, or newer)
A Face ID compatible device (iPhone X, iPad Pro 2018, or newer)
• Android devices:
Android OS version 6.0 or higher
A compatible Android device with ngerprint authentication
Turn ngerprint authentication on and off for the Arlo app
1. Enable ngerprint authentication on your iPhone or Android device.
2. Open the Arlo app.
3. Tap Settings.
4. In the ACCOUNT section, select Prole > Login Settings.
5. Slide the toggle for ngerprint or Touch ID to the right (on) or left (off).
Turn face authentication on and off for the Arlo app
1. Enable Face ID authentication on your iPhone.
2. Open the Arlo app.
3. Tap Settings.
4. In the ACCOUNT section, select Prole > Login Settings.
5. Slide the toggle Face ID to the right (on) or left (off).