User Manual
Table Of Contents
- 1. Get to Know Your Arlo Pro 3 Camera
- 2. Get Started
- Connect your SmartHub to the Internet
- The SmartHub LED
- Use the Arlo app for installation and setup
- Insert the battery into your camera
- The camera battery
- The Arlo Pro 3 Camera LED
- Tips for optimal WiFi performance
- Magnetic mount
- Install the Arlo Outdoor Mount
- Connect your camera to the Arlo solar panel (sold separately)
- Your Arlo Pro 3 Camera’s field of view
- Position your camera to detect motion in specific areas
- Test motion detection
- Arm your camera to detect motion
- 3. Arlo Pro 3 Basics
- 4. Image Quality Features
- 5. Modes, Rules, and Alerts
- Modes
- Select a mode
- Mute Notifications
- Rules for modes
- Change motion sensitivity
- Automatically stop recording when motion stops
- Control whether the spotlight turns on when motion is detected at night
- Change audio sensitivity
- Manage alerts
- Schedule your camera rules
- Set up Arlo Geofencing
- Geofencing with multiple mobile devices
- Detect audio alarms with your Pro 3 Camera
- 6. Change Your Settings
- 7. USB Storage
- 8. Arlo Connect
- 9. FAQs and Troubleshooting
- 10. Rechargeable battery safety
73FAQs and Troubleshooting
Pro 3 Wire-Free Security Camera System
User Manual
• Echoes occur in the alarm location.
• Another noise is equal to, or louder than, the alarm.
Verify that the SmartHub is online
To determine whether your SmartHub is online, check the Internet LED on the front of
the SmartHub:
• If the LED is solid blue, the SmartHub is connected to the Internet.
• If the LED is amber, the SmartHub isn’t connected to the Internet.
If you’re not at the same location as your SmartHub, log in to your Arlo account:
• If you can review the video feed from each of your cameras, your SmartHub is
connected to the Internet.
• If instead of the video feed, you see an error message (such as “SmartHub Ofine”
or something similar), your SmartHub isn’t connected to the Internet.
The SmartHub is ofine
If you’re not sure whether the SmartHub is ofine, see Verify that the SmartHub is
online on page 73.
1. Check the Ethernet cable.
Make sure that it’s securely connected to the back of your SmartHub and to your
router. Also make sure that you’re using the Ethernet cable that came with your
system.
2. Check the power adapter.
Make sure that the power adapter is securely connected to the back of your
SmartHub and securely plugged into an outlet.
3. Try to connect to the Internet from another device that is connected directly to
your router.
Try an Ethernet-connected device, not a device that is connected using WiFi (you
can turn WiFi off on the device to make sure that the device is connecting through
the Ethernet cable). Make sure that you can browse the Internet from this device
by doing the following:
• If you can’t browse the Internet from this device, you must restore your router’s
connection to the Internet.
• If you can browse the Internet from this device, continue troubleshooting.