User Manual
Table Of Contents
- 1. Get to Know Arlo Ultra
- 2. Get Started
- Connect your SmartHub to the Internet
- SmartHub LED
- Use the Arlo app for installation and setup
- Insert the battery into your camera
- Tips for optimal WiFi performance
- Magnetic mount
- Install a screw mount
- Find a good spot to detect motion
- Arlo Ultra’s field of view
- Position your camera
- Test motion detection
- Arm your camera to detect motion
- 3. Arlo Ultra Basics
- View your camera feeds
- Look back video
- Record clips from live video
- Take a snapshot from live video
- Talk and Listen
- Turn the camera spotlight on and off
- Turn the camera siren on and off
- Customize your camera feed image
- Motion detection activity zones
- Cloud recordings
- View recordings and snapshots
- Download recordings
- Charge your camera battery
- Replace a camera battery
- 4. Image Quality Features
- 5. Modes, Rules, and Alerts
- 6. Change Your Settings
- 7. Use SD Card Storage
- 8. FAQs and Troubleshooting
- 9. Rechargeable Battery Safety
12Get Started
Arlo Ultra Camera
User Manual
3. Snap the magnetic mount onto the
screw and the stopper.
The mount clicks into place.
4. Attach your Arlo Ultra camera to the
wall mount.
The magnet in the mount holds the
camera onto the mount.
5. Adjust the Arlo Ultra camera to your preferred viewing angle.
Note: You can replace the battery in Arlo Ultra cameras without removing the
camera housing from the indoor wall mount.
Install a screw mount
Some Arlo Ultra kits include a screw mount. Screw mounts are also sold separately.
1. Place the outdoor mount and secure it with screws.
If you’re mounting the camera on drywall, use the drywall anchors we provide.
2. Attach the camera to the mount.
3. Adjust the camera angle.