User Manual
Table Of Contents
- 1. Get to Know Arlo Ultra
- 2. Get Started
- Connect your SmartHub to the Internet
- SmartHub LED
- Use the Arlo app for installation and setup
- Insert the battery into your camera
- Tips for optimal WiFi performance
- Magnetic mount
- Install a screw mount
- Find a good spot to detect motion
- Arlo Ultra’s field of view
- Position your camera
- Test motion detection
- Arm your camera to detect motion
- 3. Arlo Ultra Basics
- View your camera feeds
- Look back video
- Record clips from live video
- Take a snapshot from live video
- Talk and Listen
- Turn the camera spotlight on and off
- Turn the camera siren on and off
- Customize your camera feed image
- Motion detection activity zones
- Cloud recordings
- View recordings and snapshots
- Download recordings
- Charge your camera battery
- Replace a camera battery
- 4. Image Quality Features
- 5. Modes, Rules, and Alerts
- 6. Change Your Settings
- 7. Use SD Card Storage
- 8. FAQs and Troubleshooting
- 9. Rechargeable Battery Safety
26Arlo Ultra Basics
Arlo Ultra Camera
User Manual
Charge your camera battery
Your camera battery comes partially charged. Plugging in the camera charges the
battery.
1. Snap the magnetic power cable into the camera’s power input.
2. Connect the AC adapter to the power cable and plug it in.
Note: You can buy spare rechargeable batteries and charge them in the Arlo Dual
Charging Station (sold separately).
Replace a camera battery
You can leave the camera housing in place so the camera position stays the same.
1. Release the Arlo Ultra camera from the camera housing.
Press the button on the charging port underneath the Arlo Ultra camera. The
camera clicks as it disengages from the camera housing.
2. Pull the camera all the way out of the camera housing.