Warranty

30 RGB LEDs per meter (9 LEDs per foot)
Model # RF5050030-V2RGB
Welcome to RibbonFlex Pro
®
Custom Color RGB LED Tape Lighting
Ultra thin and fl exible, RibbonFlex Pro
®
custom color RGB LED lighting is
easy to install in straight, curved and irregular spaces – offering virtually
limitless design and installation possibilities. With red, green and blue LED
chipsets, RGB LED lighting can produce a near endless array of colors, plus
shades of white, making it exceptionally versatile for creative accent lighting.
30 RGB LEDs per meter (9 LEDs per foot), model # RF5050030-V2RGB
■
Use in a wide range of residential, retail, and commercial lighting
applications
■
Perfect for adding color above cabinets, in coves and tray ceilings
■
Create drama by edge lighting counter tops and toe-kick areas
Requires a 12V DC power supply and an RGB color controller, available
separately. RGB color controllers blend the red, green and blue LED colors
to create custom colors and color-changing effects. Various models are
available, to learn more visit armacostlighting.com.
Please read these guidelines completely
before installing.
RibbonFlex Pro custom color RGB LED tape is a new and exciting type of
lighting. It is important to read these guidelines completely to understand
how the product works, and how it can be confi gured, cut to size,
connected, and installed so you can design your LED lighting layout.
Installing tape lighting is an easy DIY project, however, basic wiring skills
such as stripping, splicing, extending, and connecting wires are required.
This product operates on low voltage 12V DC power. 12V DC power
supplies are sold separately and are available in different wattages.
Visit armacostlighting.com for additional installation tips, ideas, and latest
product information.
Cut to Size
Offers unlimited lighting
design options for custom
installations.
Peel and Stick
Simply remove 3M paper
backing from LED tape
lighting and stick in place.
Connect with Ease
Use LED Snap Connectors
to join strips and add
power wires.
RibbonFlex Pro
®
LED Accent Lighting
Custom Color RGB LED Tape Light
IMPORTANT
■
Use only with low voltage 12V DC power source and 12V DC RGB
color controller
■
Do not stare directly into the LED lights when illuminated
■
Do not power LED tape while coiled on reel
■
Always use the +12V/G/R/B indicators printed on the tape light to
maintain polarity and correct color sequencing
■
Do not install this product in areas that are susceptible to direct
exposure to the elements
■
Use only insulated staples, plastic ties, or wire support clips to secure
cords and wires
■
Route and secure wires so they will not be pinched or damaged
■
For any wire runs inside of walls, use properly certifi ed CL2 or better
cabling
■
Do not install Class 2 low voltage wiring in the same runs as AC main
power. If AC and low voltage wires cross, keep them at 90-degree angles
All wiring must be in accordance with national and local electrical codes, low
voltage Class 2 circuit. If you are unclear as to how to install and wire this
product, contact a qualifi ed professional.
Planning
RibbonFlex Pro RGB LED lighting is designed for indirect lighting applications.
The light from the LED tape is not to be seen directly by the eye. Every
installation is unique and the illumination effects are personal preference.
Installation location, wall colors, mounting angle, and the light’s refl ection off
of walls, surfaces and objects will affect the fi nal lighting appearance.
Installation considerations
■
Where will you locate your power supply and RGB controller?
■
How will you switch your LED lighting on and off?
■
What is the best layout
confi guration for your
installation?
■
How will you run and conceal
the wires to your LED tape
lighting?
Important: Using painter’s tape or
masking tape, temporarily place
the LED light strip into your
desired mounting position. Power
on the LEDs to make sure you
are achieving the desired lighting
effect before removing the 3M
paper backing for fi nal installation.
Optional Soldering of RibbonFlex Pro
Soldering is a fast and easy way to join wires and make splice connections.
It is also the surest method for making extra reliable electrical connections.
Wire Lead Connection Splice Connection
To learn how to solder RibbonFlex Pro, visit armacostlighting.com/installation.
Note: Soldering connections is required for marine or RV applications due to vehicle movement
and vibrations.
Temporarily mounting the LED light
strip using painter’s tape allows you to
experiment with tape light positioning
before permanent installation.
1